2000 Chrysler Sebring Logo

Related Topics:

2000 chrysler sebring had battery light on yesterday. Door won't even lock with the key.

Cleaned the battery cables and it started first thing this morning. Now, nothing. No crank, no click.....nothing. What do you thing it could be? Alternator? Ignition actuator? Distributor? There are no lights, no dash lights, no dome light, no ding when door is opened.HELP!!!!! Door locks won't even lock.

5 Related Answers

Anonymous

  • 3 Answers
  • Posted on Apr 24, 2009

SOURCE: NO START, NO power as if battery is dead, (no dome

i have a similar problem just no buzzing obd2 code reader says tcm not communicating with ecm .# 1 cause failed ecm . bad computer .

Ad

Anonymous

  • 1 Answer
  • Posted on Jun 24, 2009

SOURCE: I HAVE A 2005 CHRYSLER SEBRING AND DOME LIGHT,RADIO ALL POWER LOCKS HAVE QUIT WORKING

me too! - looking at fuse #5 red 10 Amp one but has black thing on it.

Can't get if off..

Have read the manual is wrong and to use panel on side of fuse box for fuse locations...

Anonymous

  • 38 Answers
  • Posted on Jul 26, 2009

SOURCE: while drivingthe door locks sometimes start unlocking and locking

You have a bare wire that is rubbing. Take to your local dealership.

johnjohn2

Johnny Brown

  • 5763 Answers
  • Posted on Jul 20, 2010

SOURCE: my chrysler lhs 1995 will not start I have power

The first thing to do is make sure the battery is fully charged, then test for power at the starter, use a testlight to check for power at starter, the big cable at starter should have power at all times then the small wire should have power when the key is held in the crank postion if theres power at starter then replace the starter.

perkins48

Thomas Perkins

  • 15088 Answers
  • Posted on Mar 13, 2013

SOURCE: no crank starter is ok chrysler sebring 2003

Here's a link to your starting system,check your fusible links and your power distribution center box fuses.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a 2000 chrysler sebring the anti theft system engaged on but the car still runs but the horn honks constantly and the lights flash , I unhooked the horn to work on it but turning the key locks...

try this 1. turn off car. 2. disconnect battery. 3. put key in the ignition and turn to the run position. 4. hook up battery. 5. now turn key off and back on
0helpful
1answer

2000 sebring JXI car alarm won't shut off. Soon as I connect the battery it starts blaring, continues while the car is running. Only way to shut off is disconnect the battery. What can I do??

Try connecting the battery, while alarm is blaring, lock the door with the button on the inside of the door, shut the door, unlock with the key, then start. It worked on a friends durango.
0helpful
1answer

2006 Chrysler sebring. It won't start but the battery checks ok. Does not even try to turn over. Most of instrument cluster does not light up, only odometer, brake and oil worning lights. power window

Check your relays,fuses,and especially your ground cable on the battery side and the block,try jumping a ground from the battery to the frame or body and see if it makes a difference
0helpful
2answers

2000 chrysler sebring will not turn over

Check starter,fuse,relay.check battery have to be 12.5V.
0helpful
2answers

HELP please!! My daughter has a 96 sebring convertible and today she put her key in the door to unlock it and the alarm started going off. It wont stop, have disconnected the positive and negative battery...

Just a quick note once you hook the battery back up try locking it and unlocking it from the drivers door, if that fails you might try the passenger door. I know on some chrysler products you have to lock and lock again to arm and unlock to disarm. I hope this helps.
Thanks,
Joey
0helpful
1answer

2001 Chrysler Sebring LX sedan power locks

It is a long shot, but I took my door skins off a while back to access the speakers, and when I put the door skins back on my doors wouldn't lock. It was just a dirty contact switch. I took my driver side door skin back off, cleaned both metal surfaces with a rag and it fixed the problem. I believe the switch is on the back of your lock button, it's a thin piece of metal that looks like a pen clip.
0helpful
1answer

Chrysler sebring 1999

Sounds like you fried something when you jumped it. Make sure all the cables and wires are good and not burnt. Check fuses, and replace as necessary.
Not finding what you are looking for?

106 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...