The service and repair manual will provide you all the knowledge you need to fix the problem with pictures and diagram and you will get the manual from the given link https://toolsnyou.com/
SOURCE: I need the cylinder head torque settings for 1997
1998 Hyundai Lantra "G4GM" engine 1795cc.there are two heads or blocks, one is called the M10, other is the M12, figure out which one you have cause the torque is different for stage one by 5nm...........
Dont get confused theres 2 different engines so 2 different torques for stage1---------
heres the full details: Stage 1 - m10 = 30nm / m12 = 35nm-------------------------- -------- Stage 2 - tighten by 60-65 degrees ------------ stage 3 - tighten by 60-65 degrees. no sequence is given in the data book for tightening so go off what you thinks right, it doesn't matter on this engine.
Testimonial: "Very accurate answer. Thanks, all is well now"
SOURCE: atos 1.1 torque settings
You can call a parts store, have them look up the part first for pricing, and ask if there are required torque setting for the area. Sometimes the owners manual will have some specs
go google and type in - torque specifications for head bolts for hyundai i20 engine 2009 model --and the specifications will be there
it is no secret but you will not get them as a ft/lb setting as that is the most unreliable way of setting modern engines
what you will get is 30 ft/lbs initial the a number of degrees turn then another lot of degrees turn
you will require a degree meter available from most good auto spares shops
SOURCE: torque settings head bolt hyundai 2.2 crdi 2006
is your motors head torques listed on
also has torque sequence page number reference layouts are bottom of the document
page 33 as a pdf
or page 50 of paper listings
http://olybrake.com/pdf/fel_pro_torque_specs_guide.pdf
Testimonial: "nothing of 2.2crdi D4EB ENGINE"
3,042 views
Usually answered in minutes!
×