On a 1995 Ford Ranger where is the fuse for the horn

Fuse 6 for cruise control and fuse 8 for horn .

Try 1995 ford ranger fuse box diagram Google Search

Keith, 1995 ford ranger, looks like interior light fuse is # 27, 10 amp. in interior fuse box panel and module #3 in under hood fuse/relay. Pg. 308 to 315 in the attached manual show fuse locations for all. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Ford Ranger 1996 2007 fuse box diagram USA version Auto Genius
Diagram of 1996 ford ranger fusebox which fuse is
Ford Ranger Owner Manual
1995 ford ranger xlt interior light fuse location Google Search

Check in the passenger fuse panel (driver's side), location 6, 10AMP (Right Horn)

no engine told 2.3,3.0,4.0 , gas or diesel not told
seems diesel is 1995 and in South america's only.
no vin told.
if it has one, (the speed control version yes, and no speed control NO relay.
bench test the horn yet
or hot wire it in place , actual horn
or ground to the horn is bad as all are that old
dead horn
fuse 8 is first. if blown horn will be dead.
I guess speed controls means CRUISE.?
the steering wheel has cruise there is a relay
if not , such relay is there. proof below. (solid proof)

left side is cruise
right is non cruise opted car. Service manual drawing.

no engine told and matters.
wiring always does on different opted engines.

here is speed control words.? service manual SM.
Modern name is ISC
"On vehicles equipped, the DC motor/idle speed control actuator is mounted to the fuel charging assembly. This component controls the idle speed, including such functions as high cam rpm, anti-diesel shut off, dashpot and pre-positioning the engine fuel charging assembly for restart. This control actuator is driven by the EEC-IV system, which includes an integral idle tracking switch".

bad fuse F8 OR WRONG SIZE USED, AMPS WRONG.,MISSING
HORN FUSE IS 20AMPS IIRC.
bad slip rings
bad horn switch.
bad relay if fitted
both horns bad.
both horns 1 ground are rusty , horns work benched tested

GOOD LUCK

It is fuse 13.



Please rate this solution.

On this website you find fuse box diagram and description for Ford Ranger (1995)

https://www.carknowledge.info/ford-ranger-1993-1997-fuse-box-diagram/

https://www.autogenius.info/ford-ranger-1993-1997-fuse-box-diagram/

This is what I have for your horn wiring diagram. The relay has two sides, the switch side,right side in diagram, and the control side, left side in diagram. The control side needs voltage and ground to energize relay, top wire is voltage and bottom wire is ground on that side. My guess is problem with wiring in steering column--clockspring or horn switch. If you unplug relay, use jumper wire on switch side cavities, the horn should sound, if so, the problem is on the control side of relay. Just my opinion.

if you get a clicking noise then the system has power to the relay, make sure the horn circuit has power as well, check fuse for the horn in the underhood fuse box, if it is ok replace the horn

http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?chapterTitle=Circuit+Protection&partName=Chassis+Electrical&pageId=0900c1528018efb6&subChapterTitle=Fuses&partId=0900c1528018eeda

You can find all the fuse box info here. If you prefer, go to autozone.com and select your vehicle, fuse boxes are under the circut files.