How do I adjust valve clearance on 912/3 deutz engine and what valve to adjust when

Yes certainly can and the Service Manual as well

VALVE CLEARANCE (K3-VE)

VALVULITA https://www.valvulita.com > sites > default > files
(u) Apply engine oil to the cam of the camshaft and the journal part of the cylinder head, and then install the camshaft. NOTICE: Position it so the cam nose of ...
10 pages

Daihatsu TERIOS J100 Maintenance Manual (Page 18 of 43)

ManualsLib https://www.manualslib.com > ... > Maintenance manual
Inspection and adjustment of valve clearance. The measurement and adjustment ... apply engine oil to between the lock nut and the valve. rocker arm. q Remove ...

Tappet clearance 1300cc terios?

Fixya https://www.fixya.com > ... > Daihatsu > Terios
Nov 14, 2019 - The tappet clearance for your Hyundai Atos 2007 would be: ... Valve clearance Warm: 0.2 mm intake, 0.25 mm exhaust. ... Valve clearance Cold: 0.1 mm intake, 0.17 mm ...

I need valve clearance for Daihatsu Terios HC-EJ - Fixya
Jan 21, 2012
How do I set the valve clearances on a Daihatsu Terios 2001
Mar 1, 2015
Valve clearance and procedure for 1.2 Hc-Ej terios engine.it
Jun 3, 2014
Valve clearance for Daihatsu Terios - Fixya
Mar 20, 2012
More results from www.fixya.com

The valve clearance specification for a Volvo FL10 truck depends on the specific engine model and year of manufacture. Generally, the valve clearance for the FL10 truck with a Volvo D10 engine should be checked and adjusted as follows: Remove the valve cover: Remove the valve cover to access the valves. Rotate the engine: Rotate the engine to the top dead center (TDC) position for the cylinder you want to adjust. Check the valve clearance: Use a feeler gauge to check the clearance between the valve stem and the rocker arm. The specification for the valve clearance should be listed in the engine service manual. Adjust the valve clearance: If the clearance is not within the specified range, adjust the clearance by loosening the lock nut on the rocker arm and turning the adjustment screw. Tighten the lock nut when the clearance is correct. Repeat for each cylinder: Repeat the above steps for each cylinder. Reinstall the valve cover: Once all the valve clearances have been checked and adjusted, reinstall the valve cover. It is recommended to refer to the engine service manual for specific instructions and specifications for your particular Volvo FL10 engine.

The clearance, or gap, of the valves on a 2002 Mitsubishi Lancer OZ Rally is the distance between the valve and the valve seat when the valve is in the closed position. The clearance is typically specified by the manufacturer and is measured in thousandths of an inch.
To determine the valve clearance for your Lancer OZ Rally, you will need to refer to the manufacturer's specifications or service manual for your specific model. The valve clearance may vary depending on the type of engine and the specific application of the vehicle.
It is important to maintain the correct valve clearance on your Lancer OZ Rally to ensure that the engine operates efficiently and effectively. If the valve clearance is not within the specified range, it may cause problems such as reduced engine performance, increased fuel consumption, and increased emissions.
To adjust the valve clearance, you will need to remove the valve cover and use a feeler gauge to measure the gap between the valve and the valve seat. If the gap is not within the specified range, you will need to use a wrench to adjust the clearance by turning the adjustment screw on the rocker's arm. It is recommended that you have the valve clearance adjusted by a qualified mechanic if you are not familiar with this process.

Not all modern engines need you to set the valve clearances. Most engines use oil filled 'tappets' that self adjust the clearance as the oil temperature changes. Depending on which engine it is yours has a lot of the time you can only check the valve clearance but not adjust it.

The valve tappet clearance for the Mazda Bongo Brawny can vary depending on the specific engine model and year. Here are some general specifications for the different engine types: 2.0L FE engine: Intake valve clearance - 0.18-0.22mm, Exhaust valve clearance - 0.28-0.32mm 2.5L WL engine: Intake valve clearance - 0.20-0.25mm, Exhaust valve clearance - 0.30-0.35mm 2.5L RF engine: Intake valve clearance - 0.20-0.25mm, Exhaust valve clearance - 0.30-0.35mm It's important to note that the valve tappet clearance should be checked and adjusted by a qualified mechanic using the correct specifications and tools. Incorrect adjustment can cause engine damage and poor performance.

Hi mr. Roberto Oscar

You must download Deutz Service Manual to see this information.

Download Link: https://epartsmanuals.com/deutz/deutz-fahr-parts-manual-catalog-pdf/

firing order is 1-2-3
so when no 2 cylinder valves are in the rock position ( exhaust closing at the same time as inlet is opening) that will be no 1 piston tdc compression stroke adjust the both valves to the specification
.006" both valves
when no3 piston has valve rock adjust no 2 cylinder valves
when no 1 has valve rock adjust no 3 cylinder valves
go google and type in valve clearance of deutz 3 cylinder engine
there is another method explained where inlet of one cylinder and exhaust
this is done with one full revolution of the crank
www.deutzamericas.com page 42 of the manual

Valve clearance Google search your year make and model valve clearance. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Checking and adjusting valves
Engine Valve Adjustment Procedure The Right Way
Valve Clearance Adjustment
Valve clearance Google Search

Valve Lash ADJUSTMENT 1.6L Engines NOTE: Measure valve clearance with the engine cold.

1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
2. Remove the valve cover.
3. Set the engine to Top Dead Center (TDC) of the compression stroke for the cylinder to be adjusted.
4. Check the valve clearance. The valve clearance specifications are as follows:
   • Intake valves: 0.005-0.007 inches (0.13-0.17mm)
   • Exhaust valves: 0.005-0.007 inches (0.13-0.17mm)
5. After adjustment, tighten the locknuts to 11-14 ft. lbs. (15-19 Nm).
6. Repeat for each valve to be adjusted.

1.8L, 2.0L and 2.5L Engines The 1.8L, 2.0L and 2.5L engines utilize automatic hydraulic lash adjusters to maintain proper valve lash at all times. Periodic valve lash inspection and adjustment is not necessary or possible.

Adjust the jet valve clearance before the adjustment of the
intake valve clearance.
Jet valve clearance (hot engine)
[Standard value]. . . . . . . . . . . . . . . . . . . 0.25 mm (0.010 in.)

now adjust valve clearance
Valve clearance (hot engine) [Standard value]
Intake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.15 mm (0.006 in.)
Exhaust. . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 mm (0.010 in.)