Question about Lincoln Aviator

Open Question

On a lincoln aviator what size allen wrench do u use for tranny plug

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 2 Answers

SOURCE: what size allen wrench for 2001 pontiac sunfire

You need a 3/8" allen wrench, it would be best if you had a socket allen wrench which would work quicker with a wratchet. If you ever have to do a wheel bearing you also need a T55 Torx socket. Hope this helps!!!

Posted on Mar 07, 2009

Ad
dennymulford

Dennis Mulford

  • 1055 Answers

SOURCE: allen wrench size to fit caliper mounting bolt

some are 7/16 and some are 3/8 amd some are torx

Posted on May 30, 2009

Anonymous

  • 2 Answers

SOURCE: bolt size for 96 chevy front caliper

2002 Trailblazer - 4 bolts on caliper. I loosened the top bolt with the pin, but when I try to loosen the bottom, it feels like I'm tightening it. Do I need to loosen all 4?

Posted on Jul 16, 2009

Anonymous

  • 1 Answer

SOURCE: removing filler plug from transfer case

On an 02 Santa Fe the Transfer Case Filler plug requites a 10mm allen wrench. A socket type works best.

Posted on Sep 18, 2009

Adam Scott Roberts

  • 1243 Answers

SOURCE: What size allen wrench for

a 7 mm hex head wrench for the caliper bolts. the nut that holds the bearings in place is usually a 1 inch or 1 1/16 inch, but a pair of pliers should be enough to take the nut off after the cotter pin is removed. when you put the nut back on DO NOT over tighten it or you will damage the wheel bearings.

Posted on Aug 07, 2011

Testimonial: "Thanks for the help....I'm surprised to learn my American made truck uses the metric system for some of it's bolts!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The od light on my 03 lincoln aviator comes on and flashes. I don't feel any changes in the tranny. when I shut the car off it goes off and will stay off for several miles. whats wrong please?


If the OD lights comes on, there's a trouble code stored in the computer. Get the code and then you'll know where to start the diagnosis. Impossible to know without the code

Dec 19, 2017 | 2003 Lincoln Aviator

1 Answer

2005 lincoln aviator: check transmission comes on when I accelarate over bumpy terrain, Once I turn the truck off and back on the light is gone, it happen every so often.Why?


Most likely it is time for a tranny rebuild.
When you turn car off and then back on after a few minutes, the computer resets and it feels like the problem is gone.
soon, it will happen more often.
have a local tranny shop look at it. I did mine for $1,500. Shop around.

Apr 13, 2014 | 2005 Lincoln Aviator

2 Answers

How hard is it and be and the cost to rebuild the transmission for the 2003 lincoln aviator myself


The cost at a trans repair shop is about $3,500.00

Ever remove a transmission from a vehicle, or watch
any you tube video on rebuilding one

Apr 03, 2014 | 2003 Lincoln Aviator

1 Answer

How do I close the moon roof on my 94 Lincoln mark viii (8)? The switch is broken. Please help? I'm lost on this one. No. Replacing the switch, and jumping it doesn't work.


look in the glove box ... there should be a crooked allen (hex) wrench in there...
The switch plate should then be popped off and the allen wrench inserted into the crank hole and when you turn the wrench it will crank the roof glass shut...

Sep 28, 2010 | 1998 Lincoln Mark VIII

1 Answer

What is the size of the allen wrench needed to fit the oil pan drain plug in a 1995 toyota celica


The oil pan drain plug should require a 14mm hex head wrench to remove. The transmission pan requires a 10mm allen head socket, or wrench to remove. Are you sure you're trying to remove the correct drain? The oil drain should be on the passenger side and on the rear corner of the pan.

Dec 12, 2009 | 1995 Toyota Celica

1 Answer

When slowing down , my 2005 aviator transmission


First check your tranny fluid levels.
If it is too high or too low this could be your problem and easy to fix.
If the levels are fine it could mean that it's either engine mounts,CV joint,U-joint...in this case you would need to see a mechanic.

Hope this helps.

Sep 23, 2009 | 2005 Lincoln Aviator

1 Answer

Removing filler plug from transfer case


On an 02 Santa Fe the Transfer Case Filler plug requites a 10mm allen wrench. A socket type works best.

Apr 06, 2009 | 2004 Hyundai Santa Fe

1 Answer

After repairing a leak, where do I refill the


You have to remove the allen screw from the center of the drain plug on the pan on bottom of tranny. you will need this tool 307-437 it screws into the place of the allen screw.You can probably get your ford dealer to order you one. You have to get the tranny fluid up to operating temp and you should fill it until you have a small stream of fluid coming out the end of the tool or the hole in the drain plug where allen screw goes.

Mar 02, 2009 | 2000 Lincoln LS

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

gerry bissi

Level 3 Expert

4388 Answers

fordexpert

Level 3 Expert

5692 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...