SOURCE: blower speed
you need to replace the blower risistor. it should be located very close to the blower motor. it usually has 3 wires that are in a row and one wire a little to the left of it but located on the same oval fixture. go to the auto parts place and buy one . this way you will no exactly what it looks like so you do not have to spend a lot of time and money researching it.
SOURCE: how do you replace a blower motor on an 06 hhr
you need to cut out the bottom of the box where the motor sits and get an blower motor attachment kit from local gm dealer
SOURCE: my 2008 hhr blower motor
i had a s10 blower motor i will tap on it starts working it is worn out it has a dead spots in it wear the brushes rest on the shaft replace motor make sure it has good ground
Milton, Fuse position should be embossed on under side of cover. (integrated power module) under hood fuse/relay center. Download your manual form link below, fuse/relays start on page 472, fuse maybe M11, M15, M34. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
My Chrysler Chrysler Owners Service Manuals Chrysler Cars Minivans SUVs...
Test And Replace Blower Motor Resistor Chrysler Town Country Caravan
the front blower in my wifes 2005 chrysler town and country van stopped...
Where is the fuse for 2008 front blower
1,712 views
Usually answered in minutes!
×