SOURCE: changing inside door handle on
They break all the time. Pop the trim peice off around the handle. There are 3 tabs between the trim peice and the handle. Remove 2 screws in the arm rest of door where you grab it to close the door. Now it's best t o use a trim panel tool to pop the door panel off but a long screw driver will do in a pinch. Pop off triangle shaped peice by outside mirror first as it sits on top of door panel then the door panel. Once it's popped loose around sides and bottom it lifts off. Let it hang or unplug the wiring to completely remove. Should leave the broken handle. If it has not been replaced before it should have a silver rivet on the bottom side. Drill it out or cut the head off. Then push the handle assembly forward 1/2 inch and it should pull out.There will be 2 rods connected on the backside that should pull out. Re-install in reverse order. Some handles will have a screw to replace the rivet some won't, either way works.
SOURCE: How do you change the interior drivers door handle on a 1998
You'll need to remove your door panel (screws are by the door handle, arm rest, under door and side of door) and then unhook the rod attached to the handle lever and reverse to put on...
SOURCE: power locks for rear doors and hatch not unlocking
you have two relays on the interior fuse block one for locking and one for unlocking. Swap them and see if the problem is now such that they will not lock. If so you have your answer.
SOURCE: 2007 chevy tahoe driver side door handle will not open door
the linkage behind the handle either the retaining clip broke or popped off need to remove the door panel to check and fix
Testimonial: "Thanks I thought it might be a cable or linkage. Much thanks"
253 views
Usually answered in minutes!
×