Question about 1998 Oldsmobile Bravada

Open Question

If front seat has been pushed back to ******* the drivers electric bucket seat on 1998 Bravada. The forward and reverse does not work. How do I fix this? Thanks.

Posted by on

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 2 Answers

SOURCE: front drivers seat electric position button won't move seat back

Check the fuse. The fuse box is located on the passengers side at the side of the dashboard. Also check the fuses that are located under the hood. The location for fuses are in your car manual.

Posted on Feb 28, 2009

Ad

Paul Blanchard

  • 255 Answers

SOURCE: Put vehicle in reverse, backed up, turned wheel

Woah. This is a new one, but it sounds like your rack is binding up and causing this friction. It could be a pump problem, so check the power steering pump belt tension and fluid level. Short of that, you need to get your front end looked at. I'm not being "extra careful" here when I say this - you should get it towed to the service center and not drive it. This thing could get you hurt. . Good luck.

Posted on Nov 25, 2009

robert wales

  • 4977 Answers

SOURCE: I have a 1998 Oldsmobile Intrigue and I'm having trouble moving the seat forward, aka I can't figure out how, it'll tilt back and tilt forward but I'm not sure how to actually move it forward electric

on the same switch that tilts the seat, if you slide the switch forward or backwards the seat will move in that direction.

Posted on Jul 01, 2015

rgall3285

ray gallant

  • 64733 Answers

SOURCE: the cable broke in the back 60/40 seat in the 1998 bravada suv. Where do I get another one. And how to install it in the seat, how do I get the seat down now! Thanks......

check with a GM dealer they might still be able to get one for you

Posted on Nov 07, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Good Day.....is there an way to lower drivers seat. I feel so high driving in car. Have tried all the wheels and levers on side but obviously not doing the right things. Hyundai Tucson 2006.


Hi Viviana Is your seat manual operation if so is there a lever at the side if you lift it up several times it will raise the seat if you push it down several more times the seat should lower just keep pushing it down till the seat is at it's lowest.
If electric the forward most switch at the side of the seat you need to basically toggle in other words press down on the front part of the switch then press down on the rear part of the same switch.
It works as if you tilt the front of the seat down at an angle then you tilt the back of the seat down to match. To bring it back up just do the reverse. Good luck

Aug 27, 2018 | Hyundai Cars & Trucks

1 Answer

Slight back and forth unwanted moment of power front buckets.


Check under the seat or beside the seat.. there should be a bar there which is a manual release... it sounds like it didn't pop bk into lock position... just wiggle it to set it in full close position... if your not sure what way it goes move it all the way in one direction and push on the seat.. if it clicks and will not move then you got it and if not... pull the leaver the other way and repeat seat push

May 03, 2015 | 2002 Dodge Durango

3 Answers

How do i take the back off on a 1999 nissan maxima bucket seat


Hi, follow the instruction below......
Rear
See Figures 3, 4, 5 and 6
  1. Remove the lower seat cushion by pulling straight up on the front portion and disengaging the clips. Then hinge the seat upward to release the rear clips.
03b6e0a.jpg

Fig. 3: Pull up on the front of the lower seat cushion and disengage the clips
  1. Remove upper rear seat back-to-chassis bolts.
77eb191.jpg

Fig. 4: Remove the bolts behind the center armrest ...

a796228.jpg

Fig. 5: ... and the bolts on the lower corners ...

fbf100a.jpg

Fig. 6: ... Then pull up on the seat to disengage the three clips on the top of the seat
  1. Remove rear seat back by tilting forward and pulling straight up.

To install:
  1. Install the lower seat cushion and torque the lower rear seat-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm).
  2. Install the upper rear seat back cushion and torque the upper rear seat back-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm)

Jan 19, 2011 | 1999 Nissan Maxima

1 Answer

How do you remove the drivers seat from a golf mk1


Shove the seat right forwards and inside the track,on the floor you will see a bolt head,just remove this,on both sides, push seat back and undo the fronts,seat will then lift out.replacement is a reverse of removal.fronts first.

Jan 11, 2011 | 1999 Volkswagen Golf

1 Answer

How do i remove the front seats of a 1998 Pontiac Grand Prix?


On W-Body vehicles, the front seats are secured to the floorpan by two front hook attachments and two rear bolts installed to nuts welded to the floorpan.
The manually operated two-way front adjusters provides only fore and aft movement of the seat. When the seat adjuster handle located on the front seat is pulled up, the seat adjusters unlock, permitting travel of the seat. When the seat is in the desired position and the seat adjuster handle is released, the seat locks in place.
A power operated six-way seat adjuster is available. The adjusters are activated by three 12 volt, reversible, permanent magnet motors with a built-in circuit breaker. The motors are energized by a switch bolted on the seat side panel.
The three motors drive the front seat and rear vertical actuators and a horizontal actuator. When the adjusters reach the limit of travel, torque is absorbed through the rubber mounted grommets located between the motor and the support. An overload relay is provided in the circuit and will open should excessive stall be applied.
The optional 60/40 split bench front seats have seat back head restraints on the driver's and passenger's seat back. The head restraints are designed so they cannot be removed from the seat back without first inserting a small rounded tool inside the head restraint support tube to release the locking tab. The 60/40 split bench seat is equipped with a reclining mechanism on both the driver's and passenger's side. The recliner lever is located on the outboard side of the spring cushion. When the lever is pulled upward, the spring loaded dual linear reclining unit located in the cushion frame is released, allowing the seat back to be pushed rearward or allowing the spring loaded reclining unit to bring the seat back forward.
Bucket seats are equipped with manual reclining mechanisms. An optional six-way power seat adjuster is available. Some bucket seats are equipped with inertia seat back locks. This system allows the seat back to fold forward without requiring the occupant to release a locking lever or access to the rear seat area. During a sudden stop or deceleration, or if the front of the vehicle is nose down, the inertia system of the seat back lock will engage, holding the seat back in its rest position. A release lever is provided to allow manual release of the seat back lock when the vehicle is in the nose down position. The release lever is located at the lower rear outboard corner of the seat back.
Some W-Body vehicles (notably Pontiac coupes) have passenger front seats equipped with an E-Z Entry device. This is actuated, in an unoccupied seat, by completely folding the seat back forward disengaging the adjuster, and sliding the front seat forward to gain access to the rear seat area. To return the seat to its normal position, return the seat back to its rest position, and slide the entire seat rearward, engaging the adjuster.
W-Body rear seats are available in several styles including a rear seat with an integral child restraint device.

Sep 01, 2009 | 1998 Pontiac Grand Prix

1 Answer

Driver's power seat not working properly on 2004 tahoe


it sound like you need to replace seat control switch

May 14, 2009 | 2004 Chevrolet Tahoe

1 Answer

Bucket seat shifts forward and backward


i had the same prob when i got my durango.i set the seat where i was cumfortable and still where my wife could be cumfortable drilled two small holes on the side of the rail and shot two rivets through it.all the other controls work the same but it doesnt go back and forth anymore.works for me ,alot cheeper than a power seat.

Apr 12, 2009 | 1998 Dodge Durango

1 Answer

Driver side power seat front to back motor stuck forward


Take apart the drive box in front of seat track, on both sides with an allen wrench. You can then push the seat to get at the bolts to remove it. My trolley drive motor had bad brushes. I am now looking to replace the motor, if I can find the replacement.

Oct 03, 2008 | 1998 Chrysler Sebring

1 Answer

Power driver seat will not adjust forward or back.


My intuition tells me that the 6 way power seat track forward / reverse motor is bad. Sometimes you can replace just the one motor but most often a whole new power seat track is the only way to repair. It is not too bad to replace but the seat will have to be removed from the car and placed upside down to access the track assy. There are 2 bolts in the front of the seat and 2 bolts in the back of the seat that hold it down to the floorboard. Once it is loose you can rock the seat backwards to access and unplug the electrical connectors.

Aug 02, 2008 | 1996 Mercury Grand Marquis

Not finding what you are looking for?
1998 Oldsmobile Bravada Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

Jonah Oneal

Level 3 Expert

14092 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...