SOURCE: need plug wire schematic for 2000 toyota tacoma
REMOVE THEM ONE AT A TIME THIS WAY YOU DONT GET THEM MIXED UP.
SOURCE: 1990 toyota corolla stereo wiring codes
what you need is to buy a wiring adapter for your car.it only cost about 15 bucks and plugs right in to your original plugs that were connected to your factory radio.the great thing about this adapter is that you dont hava to cut your original plug off just in case if you ever want to reinstall your original back.also the wires that go to your new headunit are color coded to match the exact colors that you connect to your stereo.you can't mess your connection up because all you have to do is connect each wire to the right color,tape them up,connect your stereo and you have music with all of your speakers working like they should and without any headaches.i hope this info helps.take care and good luck, manny
SOURCE: Wiring diagram to add trailer connectionTrailer
http://www.youtube.com/watch?v=EgajKpMgZpE
He installs it in the video.
SOURCE: how to wire trailer lights to a toyota tacoma
The easiest way is to get the kit that plugs into the taillight harness to adapt your plug. If one isn't easily available then you can use scotch locks to splice into your trucks harness. Use a test light to make sure you locate the right wires in your trucks harness and go by the wire diagram on the instructions from the plug to hook it up.
I hope this helps!
241 views
Usually answered in minutes!
×