Cars & Trucks Logo

Related Topics:

Tony DeMercede Posted on Dec 10, 2016

Need PCM WIRING DIAGRAM for 1999 ford ranger 3.0L v6 4x4 flex fuel engine vin letter V

Bought a 1999 ford ranger 4x4, 3.0 liter v-6 Flex Fuel vin letter V, back in February .... I drove it less than 200 miles and the engine blew ....... Here it is now, December, and I just had the engine replaced with a great used engine, .... but the check engine light does not light up, for the emissions test, ... the engine is running exceptionally well. .... I changed the check engine bulb, and I have power at the bulb ... and if I touch the bulb with the test light and ground it ... the check enging light-bulb, lights-up. ... So I want to check to see if the check engine light wire, is OPEN somewhere, because I Think that the creepy people that I bought the vehicle, somehow may have rigged the thing, so that the light would not light-up, and I can't find the pin-diagram, for this vehicle... and cant find it in the oin-line manual .... I am suspicious that the wrong wiring harness, is possibly installed, .... all I have been able to find on google images, are 4.o ranger PCM wiring diagrams, and can not find any for this 99 3.0 flex fuel vin number V..... everything that I have looked at shows a diferent color wire than I have on this one,... running to the check-engine-light, .... the 4.0 shows a pink with light green wire, for the check engine light... My 3.0 going from top left to right, has a seemingly, light-green / white wire, ... then next to the right, is a red / dark blue wire, the next is a white wire, to the right of that one ... The engine was swapped just before I bought this truck, and I am just trying to figure out, what these idiots did, with this engine and/or wiring-harness

5 Related Answers

Anonymous

  • 51 Answers
  • Posted on Dec 26, 2008

SOURCE: looking for diagram for fuse box for Ford F250 Flex fuel Gas/Prop

ok go to this link they have every fuse panel diagram in your truck


http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801e56ea

they also have the wiring diagrams for most things if you need them too you can go to


http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801e56fa

Ad

Anonymous

  • 405 Answers
  • Posted on Dec 29, 2008

SOURCE: 1992 Isuzu Rodeo Radio Wiring Diagram needed.

http://www.the12volt.com/installbay/vehicles.asp try this site out and see if it will help you.

Anonymous

  • 290 Answers
  • Posted on Mar 26, 2009

SOURCE: needing wiring diagram for 1991 dodge dynasty le

here is what I found:
http://www.the12volt.com/installbay/stereodetail/715.html

Anonymous

  • 1 Answer
  • Posted on Apr 26, 2009

SOURCE: Only the left rear trailer light comes on when I apply the brakes.

I had the same problem with my 2002 Silverado last summer when I first bought my boat and was getting the trailer ready to go. Like an idiot, I rewired the boat trailer on that side before I decided to look at the owner's manual. The pickup has separate fuses for right and left side of trailer. They're located in the big box in the engine compartment. I replaced the 10 or 15 size fuse and haven't had a problem since. Hope this helps!

Anonymous

  • 2 Answers
  • Posted on Sep 06, 2009

SOURCE: wiring diagram or color chart for a 96 ford mustang radio harness

dont even worrie about it just go to walmart or an auto parts and get a wiring harness they are not so expensive

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What engines will interchange with mine>

this depends on what transmission you have , as you can install just near anything ford makes from a 1.9 L 4 cyl ( I don't recommend that !! ) all the way up to what I had a few years back , a five liter v8 with direct port fuel injection ( I do recommend that !!) , there's a few folks out there that make kits to install most anything in these versatile trucks ,Im disappointed they discontinued making them

the problems occur nowadays not with getting the different parts to work together , but now the state motor vehicle laws make it super hard to do engine swaps to larger engines (they make more pollution )

most any of the 6 cyl engines that ford makes will work just fine with the transmission it came with from the 2.9 Liter to the 4.9 liter will fit with few little mods, but you will need to change the engine control computer to follow the engine you have chosen
0helpful
1answer

I swap my engine on my 03 ranger 3.0 flex fuel,with one from a 02 ranger gas fuel. It was running rough until I put my old fuel rail and injectors.But I still have a miss on cylinder #3 already install new...

Check compression in number three. You could have bought a bad engine. And yes. You need to change every sensor. If they don't match with the plugs. replace the engine. There is a reason for different engine codes. You should have stuck with them.
0helpful
2answers

1996 using E85 because Ford encourages you to do so

No 1996 vehicle uses E85
That product wasn't even thought of or
available until a few years ago
The is 85% Alcohol & will ruin your entire fuel system
The car wasn't designed for that fuel,no idea why you
would even go there,just silly
0helpful
1answer

I need a manual on the ford 3.0 liter flex fuel for my 2000 ford taurus vin code2

Click on link.http://www.automotix.net/autorepair/diy/2004-ford-taurus-repair.html
1helpful
1answer

Wiring diagram for dodge caravan

I thinking that you are talking about "firing order"...

1997 Dodge Caravan FWD 2.4 liter DOHC L4 VIN "B"
and
1997 Dodge Caravan FWD 2.4 liter DOHC L4 VIN "X"

ed16d41.gif



1997 Dodge Caravan FWD 3.0 liter V-6 VIN "3"

a7df24a.gif



1997 Dodge Caravan FWD 3.3 liter V-6 VIN "R"
and
1997 Dodge Caravan FWD 3.3 liter Flex Fuel V-6 VIN "G"

678cb29.gif


1997 Dodge Caravan FWD 3.8 liter V-6 VIN "L"

6a92d51.gif

Hope this help (remember comment and rated this post).
0helpful
1answer

2003 Ford Ranger Extended Can 3.0L V-6 Flex Fuel Automatic Transmission. I put a new motor in my little truck and now the transmission acts like its in neutral. I just found out the transmission is...

How do I change the 2003 Ford Ranger XLT 3.0 L Flex Fuel -Auto Trans 2wd Camshaft synchronizer and sensor . Do I need any special tools ? Are there after market parts that are precise replacements for the OEM parts ?
4helpful
2answers

I need the firing order of the spark plug wiring and a wire diagram of the spark plugs

Here ya go:

4e3f286.gif
Comments: Jun 29, 2009 - Because I don't know your VIN number/letter:

a62dab4.gif Jun 29, 2009 - 2001 Ford Taurus
3.0 liter V-6 DOHC VIN "S"

This goes to the one above.
Jun 29, 2009 - This goes to the first photo:

2001 Ford Taurus
3.0 liter V-6 VIN "2" Jun 29, 2009 - Sorry....this goes to the first photo:

2001 Ford Taurus
3.0 liter V-6 VIN "U" Jun 29, 2009 - This is 2001 Ford Taurus
3.0 liter V-6 VIN "2"

It is the same as VIN U:

2aa4c7b.gif
0helpful
1answer

No spark or current from ignition coil

possibly the flex fuel sensor- its on the frame rail just behind the drivers door- check the conector and connections on the sensor itself.
1helpful
1answer

Looking for diagram for fuse box for Ford F250 Flex fuel Gas/Prop

ok go to this link they have every fuse panel diagram in your truck


http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801e56ea

they also have the wiring diagrams for most things if you need them too you can go to


http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801e56fa
Not finding what you are looking for?

1,247 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...