If you look down in the top of the transmission where the shifter goes. You will see three parts. These parts are forks. There is a center slot in all three. The slots have to be lined up and in the center. This is neutral. Then the shifter can be installed.
SOURCE: shifter knob removal
the shift knob is glued and pressed on, the best way to remove it intact is to heat the knob with a heat gun and pull straight up with a lot of force, please be very careful because when the knob finally releases there is very good chance that you can hit yourself in the face, if the knob is not to be used again you cut a **** up the side with a dremal tool,
SOURCE: manual 5 speed transmission 1989 ford ranger
Try to see past the slave hose and bleeder to see if you can see the slave work. Could it be stuck in the depressed position? Have a helper push the pedal while you watch. I think your tranny is broke.
SOURCE: 2003 Ford Ranger, 5 speed manual. Sometimes I
if you have a slave cylinder on it my not be working right,, if you have levers maybe a brushing wearing out cause wobble
Testimonial: "Thanks, I'll check it out."
SOURCE: Exhaust removal required to drop transmission on 92 Ford Ranger?
Yes you do. trust me you don't want to get that thing half way out and down and not be able to continue. Soak those rusted exhaust studs in a good penetrating oil over night. I bet they come right out. I would not recomend cutting the pipe.
151 views
Usually answered in minutes!
Hi denise cooper, I want to help you with your question, but I need more information from you. Can you please add details in the comment box?
×