For the 1991 Isuzu Rodeo with the 3.1L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
....(back).....'.5...........6.'
'.3...........4.'
'.1...........2.'
....(front)
Distributor:
.....(back)
.................(+)-screw
..........4
..3
...................5
2
.................6
.........1
(+)-screw
.....(front)
Rotation: Clockwise
SOURCE: 1997 isuzu rodeo
The firing order for a six cylinder is 1-2-3-4-5-6 distributor rotation-clockwise...cylinders 1-3-5 on drivers side...2-4-6 on passenger side
SOURCE: firing order 1995 isuzu rodeo 3.2v6
123456 IS THE FIRING ORDER... RIGHT BANK (RIGHT AS IN SITTING IN THE DRIVERS SEAT NOT STANDING IN FRONT OF THE CAR)STARTING AT FRONT IS CYLINDER 1 THEN 3 THEN 5 THEN THE LEFT BANK IS CYLINDER 2,4,6, FRONT TO REAR... THE COILS FROM LEFT TO RIGHT (STANDING IN FRONT OF CAR) ARE 1,4,6,3,2,5 HOPE THIS HELPS
SOURCE: FIRING ORDER AND TIMING SET UP FOR MITSIBISHI V6
The firing order is 1-2-3-4-5-6. Let me know if you need more info
SOURCE: FIring Order of a 2004 Isuzu Rodeo 3.2L Engine
My apologies for the delay....Due to the bad economy the number of questions posted has skyrocketed 50% in the last 4-months.
For 2WD and 4WD it is the same:
For 3.2L:
Firing Order:
1-2-3-4-5-6
Cylinders:
5-------6
3-------4
1-------2
(front of vehicle)
Coil is on the Spark Plug
Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!
2.2L VIN D engine Firing order: 1-3-4-2 Distributorless ignition system
517 views
Usually answered in minutes!
×