Hey DonAld, these are not hard to replace..( I do not know which engine you have..it makes a difference!! ).. take a PICTURE of where the current TPS os positioned and located... the radial (adjustment) location IS critical!!..
here is a link to Autozone, ...O'Reilly's, and Advance Auto should have one too..
Ford Contour Throttle Position Sensor TPS
https://www.oreillyauto.com/shop/ignition---tune-up-16776/engine-sensors-17084/throttle-position-sensor-12043/2000/ford/contour?q=tps
Advance Auto Parts Down for Maintenance
SOURCE: How do I replace a camshaft position sensor on a 2000 ford escort
bullshits, the CMP sensor is near the 4 injector, you have to take out all the electric conector near injector 4, take out the 2 screws that hold the fuel rail, sometimes you have to take out the 4 injector for the space, then take out the screws that hold the CMP, lub the o´ring of the new one and reverse this steps.
SOURCE: ford contour 2000
The range sensor is located just to the left of the battery on the automatic transaxle. It is connected with 2 bolts.
SOURCE: Where is the camshaft position sensor in a 2000
should be on the rear of the right side of the head
SOURCE: how to replace throttle position sensor on a ford
VERY SIMPLE PROCEEDURE GET NEW ONE AND HOLD IT UP NEXT TO OLD ONE YOU CAN DO IT
SOURCE: THROTTLE POSITION SENSOR ON A 2007 FORD EDGE
Doubt it failed----did you test it with a volt meter,put
an oscilloscope on it,or look at scan tool data
Have a couple T20 Torx Screws that hold it on
You heat them with a hair dryer to soften the
Blue Thread Locker
Why not tell us the vehicles problems & what you tested so far
196 views
Usually answered in minutes!
×