Question about Jeep Cars & Trucks

2 Answers

I have jeep liberty 2010 code p0846 - Jeep Cars & Trucks

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

No question posted, ask a real question please
questions are like
1: can you guess cause, answer no.
2: can you find it, (yes, with my tools on my car)
3: can you advice tests?, sure, the service manual covers this extensively, read it?
4: can there be more than one possible causes, sure
as it says, opens/shorted or dead sensor or wires to it
are way more complex things wrong in the box.
means get it a/t serviced, they run a bunch of tests
on, it all cover in same service manual.
5: can i get car serviced, sure
6: can you name one, no,.
7: are there good shop sure ,google ASE zip finnder
8;or other questions.... lots endless, on a/t


P0846-2/4 Pressure Switch Rationality P0846-2/4 PRESSURE SWITCH RATIONALITY RELATED TIPM TCM POWER CONTROL CIRCUIT DTCS PRESENT LOSS OF PRIME DIAGNOSTIC TROUBLE CODE (DTC) PRESENT
(T47) 2/4 PRESSURE SIGNAL CIRCUIT OPEN
(T47) 2/4 PRESSURE SIGNAL CIRCUIT SHORT TO GROUND
(T47) 2/4 PRESSURE SIGNAL CIRCUIT SHORT TO VOLTAGE TRANSMISSION SOLENOID/PRESSURE SWITCH ASSEMBLY POWERTRAIN CONTROL MODULE

Posted on Feb 08, 2017

Ad

  • Level 1:

    An expert who has achieved level 1.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 26 Answers

A simple Google on that code there.

Posted on Feb 08, 2017

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TCM AND BAS light is on on my 2010 liberty


You need the dealer or a well equipped shop to scan the TCM for fault codes.

Oct 28, 2016 | 2010 Jeep Liberty

1 Answer

Code NEUT DEF on jeep liberty 2010


in the cluster right your eyes are on the cluster and it shows errors right? the nav the radio where?
odometer messages, VIC or EVIC display messages, where?
try camera photos if you cant tell where eyes were.

is car USA CAR?
which engine, is engine gas or diesel,what size, liters.
is trans automatic?
is car 4wd or 2wd.?
we cant see car nor what country its in so,....
books on jeeps MATCH that.

lost the operators guide ,out of glove box,
our is free for USA jeeps at USA jeeps dot com.
need that? is that it?
here it is posted over 500 times here. at least.
i scanned the usa book for you and no such code exists
but cars not in usa, have there own codes, and book.
so not telling country , makes this very hard.

neutral Defrost.
jabber waakky, the car has vast error and warning codes
even radio, nav, cell, reverse sense and more, vast codes.
why not tell where you saw it,?

Oct 22, 2016 | 2010 Jeep Liberty

1 Answer

2010 jeep liberty no start with gate lite on dash


The rear gate is the rear door at the back of the vehicle..Open and shut it to make sure it is latched...Then wear safety glasses disconnect negative battery cable to clear codes ..reconnect then try to start it..You shouldn't have the code once gate is shut however disconnecting the battery will erase all codes...Also make sure both battery cables are tight....

Feb 20, 2015 | 2010 Jeep Liberty

1 Answer

Need cooling system diagram for 2010 jeep liberty 3.7 v6


It is electric.It is mounted in the center on top off the air plenum. You have to remove the dash to get to it. Last one I did was the heater core. 2003, had to remove the dash out of the vehicle, drop the steering column and remove the air plenum. All day job. You need a manual, lots of nuts, bolts, and screws to remove.

Dec 28, 2014 | 2010 Jeep Liberty

1 Answer

Check engine light on in 2010 jeep liberty


the operators manual is clear.
says, get engine scanned and serviced , at jeep or any ASE shop.
for DIY, you never say if this is a DIY question>??????

if diy , you SCAN it, and use a SCAN too
beg, barrowed, rented or bought.
your call.

Aug 07, 2014 | 2010 Jeep Liberty

1 Answer

Why are abs,service 4wd,esp,traction control light come on 2010 jeep liberty


Could be bad wheel speed sensor. You need someone with a code reader that reads ABS codes.

Jul 02, 2014 | 2006 Jeep Liberty

1 Answer

2010 jeep liberty uses 1 quart of oil every 1000 miles


i should be under factory warr and they should fix it for free

Apr 21, 2012 | 2010 Jeep Liberty

1 Answer

Air blend door jeep liberty 2010


My blend air door is stuck on my 2010 liberty. I have removed the actuator panel on the drivers side and the middle door that controls the air flow to the dash is completely seized. There are 4 blend air doors on this liberty, 2 control the heat/ac and 2 control the air flow.
there is no access to them from the drivers side and the passanger side looks like I have to cut into the air box to get to them.

Jan 03, 2012 | 2010 Jeep Liberty

1 Answer

I need the wiring diagram color codes on a 2010 jeep liberty to hook up a hi low converter which conveniently came with no instructions please hel p


Autozone.com should have wire digrams in the repair section. They are free. All you need to do is register which is also free.

Sep 18, 2011 | 2010 Jeep Liberty

1 Answer

Brand new 2010 Jeep Liberty throwing error codes ??


Hello... This doesn't sound good... I would not recommend driving it. Also, I don't think you have a lemon it sounds like the error codes are indicating a reprogramming that needed to be done. After that, the vehicle should be as good as new... Hey it is new (smile)

Good Luck...

Dec 25, 2009 | 2009 Jeep Liberty

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...