1997 Mercedes-Benz C-Class Logo

Related Topics:

b
brian wander Posted on Feb 14, 2017

I replaced the ignition switch on my 1997 Mercedes c230. the battery had gone completely dead, and now the car will not start. it acts like the security is engaged. what can I do

5 Related Answers

Anonymous

  • 5158 Answers
  • Posted on Feb 23, 2009

SOURCE: spare key for c230 mercedes benz

does it have a chip in the key ? if not any locksmith can make you one

Ad

Anonymous

  • 1 Answer
  • Posted on Mar 24, 2009

SOURCE: mercedes/dead battery can't open trunk help

Just had the same problem.

The fact the key had not been used in many years the locking mechanism was basically stiff'

Applied copious amounts of wd40 kept turning the key back and forward while applying pressure and release to the boot lid did the trick

gordanddar

gord storey

  • 477 Answers
  • Posted on Jun 04, 2009

SOURCE: MY WILL NOT START THE CAR C240 MERCEDES BATTERY IS NOT DEAD

I am assuming that the engine won't even turn over. could be lots of different things. The simplist is to make sure the car in in PARK , won't start if not. Other things could be , Security imobilizer if you have one. Does your key have a electronic chip in it ? Try your other set of keys if you have one. Check if battery connections are clean and tight.

Anonymous

  • 2 Answers
  • Posted on Aug 14, 2009

SOURCE: battery is dead and can't open the trunk, even manually

Starter motor on this car is imposible to get to..better find the post forward of the drivers side fuse box in the engine compartment where a bunch of wires come together. This is a positive terminal attach red jumper here put the negative jumper on any bare metal bracket of the engine

Anonymous

  • 1 Answer
  • Posted on Mar 24, 2010

SOURCE: mercedes/dead battery can't open trunk help

I have the same issue (battery is completely dead in my 1998 Mercedes C280 and I can't pop open the trunk). I looked under the hood and have no idea where the positive charging post would be - can anyone help me find it? Thanks

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do you reset the security on a 1997 Mercedes c230. the battery went completely dead and now it won' start.

Make sure the car battery is fully charged. Make sure your remote key has a good battery, too.
Place the remote in the ignition and watch if the red light inside the remote will blink when communicating with the car. The ignition key should be able to turn and the steering wheel should unlock. Then you can crank and start the car.
0helpful
1answer

1997 Mercedes c230 turns over fire once and die out

Have you tried first priming and purging the fuel lines of air bubbles prior to replacing the fuel pump filters? If you did and the engine still won't turn, otherwise you'll also have ignition problems. If the Toyota cars have 4 reasons the engine won't run, the Mercedes Benz has 101 reasons why the engine won't run, so to speak. So you start checking on the fuel pressure, fuel injection voltage or signals, spark ignition and all the way to the throttle sensors, crank pos senseor, ecu, or even the car alarm/immobilizer.... But first keep trying on purging all the air bubbles (with the Schrader purge valve on the rack) and make sure you have adequate voltage on your battery for high speed cranking, sometimes these will take a while at first.
0helpful
1answer

New battery In mercedes no power

I'm not a car mechanic, but, it sounds like you might want to check the fuse to the ignition switch, and, if that fails, it might be a problem with the Start Safety Switch on the transmission. Good luck.
0helpful
1answer

Are the clutch interlock switch and a clutch inerlock relay the same thing for a 1997 nissian d21 truck

switches just complete a circuit
from your description it indicates a bad ground , dirty battery terminals or problem starter motor
0helpful
1answer

The key in the ignition to my mercedes 2002 c320 will not turn

Just replaced my key the ignition switch and the esl in my c230 98 Benz. Worked for about a week and now the esl will not unlock the steering or start the car. Is there any way to reset the esl? All three components are new I don't understand the problem .what causes the esl not to engage when you put the key in the ignition
0helpful
1answer

98 c230 key won't turn and steering stays locked...can't move car....help!!!

first replace the battery in your key and have a look if you have any additional key try by that key it may work if without right diagnose no one can find it's faulty key or electronic ignition switch, if not the fault in key possibly faulty steering lock or electronic ignition switch, in this case you have to get your car in to the Mercedes workshop for diagnose.
Not finding what you are looking for?

220 views

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...