SOURCE: nissan murano 2005 sl keyless entry remote programing
Close all vehicle doors, LOCK doors using drivers side switch.
Insert key all the way into the ignition, (do not turn) remove key.
Repeat this step 5 times. (6 total)
Hazards should flash to indicate program mode.
Press any button on transmitter to be programmed, hazards should flash to indicate successfull program.
*For additional remotes, cycle drivers door lock UNLOCK, LOCK, press
any button on remote, hazards should flash. Repeat step as necessary.
Ignition ON, (engine off) ignition OFF, UNLOCK using drivers side switch, test remotes.
Source
SOURCE: My 2005 Nissan Murano drivers automatic window
have it reprogrammed..alot of these auto up/down features need to be reprogrammed..or the regulator and mtor assembly may just need to be replaced and then reprogrammed.. have the dealer try to reprogram it first.. i dont think u have a switch problem.. i believe its the reg/motor assembly.
SOURCE: Replace rear wiper on 2005 Murano
You probably already figured this out, but you have to remove the wiper arm completely in order to replace the wiper blade.
The blades are an unusual size (somewhere around 14 1/2") and I believe they are only available from a Nissan dealership. They include printed instructions in the box but just in case, this is from the official Nissan service manual:
SOURCE: 2003 Nissan Murano Driver door won't lock or unlock with keyfob
The key fob is the remote. But the remote type that works like a key. The remotes that you just need to carry on you to start the car or truck. That is a Key Fob.
Thanks Jay!
SOURCE: 2003 Nissan Murano hatch back door won't unlock or open
I have a 2004 Murano. I opened the small hatch and with a screw driver and someone on the outside managed to open the hatch. The problem appears to be bent pieces inside. After straightening them out and using a good silicon spray, mine works again. It should be lubricated quite frequently.
216 views
Usually answered in minutes!
×