SOURCE: Cadillac Escalade
i had the same problem u need to take off and clean the throttle body and it clears right up
SOURCE: suddenly without brakes or power steering
check belt and check p/s fluid if ok pump is probably bad with truck running you should be abel to see the fluid flowing threw th reservior when running
SOURCE: Have a 2002 Cadillac Escalade AWD 6.0 Knock sensor intake manifol
If you're apprehensive about doing this work, buy a Haynes repair manual (about $20), It shows you how to remove the manifold
Testimonial: "That the best advice I?ve gotten, thanks!"
SOURCE: how to remove and replace front wheel hub assembly
Lift and SAFELY support the front of the vehicle.
Remove tire
Remove caliper bracket to steering knuckle bolts- larger and closer to the axle.
Use a wire or strap to support the caliper out of the way.
Remove the rotor
Remove the dust cap-( useless on these, but they put them there anyway)
Remove the axle nut- 36mm
Use a hammer and block of wood to make sure the axle is loose.
Remove the ABS wiring from the body
Remove the 3 15mm bolts from the back side of the knuckle.
Use the block of wood and hammer on the back of the hub flange to loosen the hub.
Remove hub
Clean the surface of rust,
Install new hub.
Here you can find the quality parts http://www.autopartspoint.com/products/wheel-hub-bearing.html
154 views
Usually answered in minutes!
×