I have a 2007 Honda CR-V, I just purchased a Transponder key, but did not come with programming instructions. This key does not have a key fob or buttons.

You need to go to a Honda dealer for this as the new key has to be programmed to the car and you will not be able to do this yourself even if you buy a new original equipment key from another source.

Is the key worn down or the streering wheel locked.is the transponder your fob

the key or fob?
the key is bad,
use the spare key that came with all new cars.
always keep a spare. or get stranded.

Hello Sophie,

FIRST OFF ...
>> I would ALWAYS choose a LOCKSMITH
over a DEALER regardless of cost (strong opinion).

Very sorry to hear of your violation...
It never feels the same but now you are SAFER with the
knowledge ... you were never actualy safe.

If other than your CAR keys were ALSO taken...
YOU NEED TO FOCUS on those other KEYS
FIRST (particularly house & mail-box)

Truth is...
your car is never ANY safer than the GLASS IN THE Door
(and only we... the owners... care about that GLASS).

Car TRANSPONDER locks are another situation.

If you use a LOCKSMITH it will be cheaper & safer.

I have used eBay to get my new KEY and KEYLESS
entry fobs... AND ... would TRUST a LOCKSMITH worlds
better & longer than I could throw a DEALERSHIP...!!

My niece had her car UNLOCKED and her HIGH-END
sound equipment expertly removed THE NIGHT
following getting her HONDA serviced at
OAKLAND HONDA ...
She nor I FEEL it was a coincidence (opinions)...

Where-as...
LOCKSMITHS trade on their excellent REPUTATION
and do the SAME work for half (or less) the COST.

2001 HONDA ACCORD 3 0L V6 Ignition Lock Cylinder RockAuto

REMEMBER to ask them the ERASE/OVERWRITE the
old keys & FOBs.

The locksmiths MIGHT know how to RE-KEY your existing cylinders (I think un-necessary)...
Dealers probably (opinon/experience) won't even TRY...

and of course...
NEVER leave anything of value in your car!!

keylessking
2 Replacement for 1998 2002 Honda Accord Key Fob Remote KOBUTAH2T eBay

OEM transponder keys
2 NEW HONDA ACURA TRANSPONDER CHIPPED KEY BLANK HD106PT 692246 35113 SY8...

If you are serious about this comment me back... I'll pull
your owners manual and look for your capabilities.....
Pretty sure WITHOUT 2 PROGRAMMED IGNITION keys
you can do NOTHING YOURSELF.

ManualsLib Makes it easy to find manuals online

Carnac the Magnificent

did some quick research for you and found this easy and very clear step by step instructions on how to program your transponder car key to your vehicle.. this works for the following models though :

Accord 2003 to 2006

Civic 1999 to 2006

Element 2003 to 2006

Odyssey 1999 to 2006

Prelude1999 to 2001

Accord SE 1997

CR-V 1998 to 2006

Insight 2000 to 2006

Pilot 2002 to 2006

now here are the steps:

1. Turn the ignition on
2. Press Lock/Unlock within 4 seconds
3. Turn ignition off and hen back on within 8 seconds
4. Repeat steps 2-3 two times
5. Press Lock/Unlock again within 4 seconds. The system should now lock and unlock the vehicle to indicate it is in programming mode.
6. In the next 10 seconds: press Lock/Unlock button allowing the doors to lock/unlock once; then press lock/unlock button of each remaining key, allowing the doors to lock/unlock once.
7. Switch ignition off and then remove the key

Civic 1996-1998

1. Turn ignition on
2. Press and hold the valet button which is situated on the radio within 5 seconds.
3. System should now lock and unlock the vehicle indicating it is in the programming mode
4. Within 5 seconds turn ignition OFF and press Lock/unlock on the remote fob to be programmed
5. Within the next 10 seconds, press Lock or Unlock of any remaining keys, allowing the doors o lock or unlock once.
6. Release valet key
7. Switch ignition off and then remove the key

Radio remotes 2 and 3 button types

1. Switch ignition on and repeat for 3 times.
2. Press he lock button, switch the ignition off and back on and then press lock button again.
3. System should now lock or unlock
4. Press the lock button of all remotes to be coded. The car should acknowledge this by locking/unlocking each time
5. Switch ignition off to exit the programming mode.

If you will have any further doubts or question to ask i suggest you to check out the page where i found this which is http://www.carkeyadvice.com/step-by-step-fob-programming-guides/honda :) i hope this was the solution you were looking for mate! happy happy new year!

For instructions on how to program remotes and keys check website below, I use these and they are usually very accurate. This website does state that on your vehicle, special equipment is needed to program a key fob, as there is no onboard programming for it. However, there are programming instructions for transponder keys.
http://www.programautokeys.com/

http://www.programautokeys.com/

put your key in the ignition, then remote start it, if it starts, you need to either move the transponder loop of key or reprogram the transponder or take it to a remote starter shop

Theres only 1 way to tell if it will work - try it :)

Here is the procedure to marry a new remote to your truck.

1. Close all doors and then open drivers door and press the UNLOCK
button on drivers door panel while door is open and insert key in ignition.
2. Turn ignition from OFF to RUN (not start) 8 times within 10 seconds, with the
8th time ending in RUN. Door locks will cycle to confirm programming
mode.
3. Within 20 seconds press any button on first keyless remote.
Door locks will cycle to confirm programming.
4. Within 20 seconds, press any button on second keyless remote.
Door locks will cycle again to confirm programming.
5. Turn ignition to OFF.
Locks will again cycle to indicate end of programming mode.


Both the Escape and LT program the same - the transponder should have the same resistance.


Try it out!!


Thanks for using FixYa - a Very Helpful Rating is appreciated for answering your FREE question.

you have to tow car to dealer - then they cut and program key - yes,it is a bit pricey!
internet offers ways but will only work couple times - repos do same thing