I have hp m3035 printer and have an error .....55.04.92 dc controller error pls tel me sulution. thanks

I don't see any answer, but your response indicates you saw one. This was probably an Artificial Intelligence Chat GPT 4 answer that someone used to answer your question. They get deleted because they are very vague, although they do sound great. The area where you replied under your question is for Experts to ask you questions before committing to an answer. Reply by clicking Add a Comment under the person you are replying to. At the moment, you are replying to yourself!

Help here

https://www.google.com/search?q=Honda+Civic+Hatchback+(2005)+radio+stopped+playing+and+appeared+the+tel+mute+message

..

The error 51.2M is a laser error on this printer. M indicates that it relates to the Magenta toner cartridge. If the reset below does not work then you need to call HP support or just get a new original Magenta cartridge and it will work. A cold reset might resolve this issue if the printer does not have a laser hardware error.
I have provided the steps below to help you perform the steps.
Caution: The printer settings will go back to the default factory setting.

1. 1. Press the green (Select) button to continue.
   2. Turn the printer off.
   3. Perform a cold reset.
      1. Turn the printer on.
      2. Watch the control panel.
      3. When the memory starts counting, press and hold the green (Select) button.
      4. Continue holding the green (Select) button until the Ready, Data, and Attention lights flash once, and then stay on steady.
      5. Release the (Select) button when the Ready, Data, and Attention light are on steady. The control panel will display SELECT LANGUAGE.
      6. Press (Down Arrow) button once. The control panel will display COLD RESET.
      7. Press (Select). The printer will perform a cold reset and then continue its power-on sequence.
   4. If this message persists get a new Magenta Toner cartridge or contact an HP-authorized service or support provider.

speed alarm starts at 120 km per hour
top heavy car gets unstable above that speed

on a 2004 speed alert was built in as a safety feature
all links from 2004 to current
on "how too " have been taken off the internet

the buzzer wire cant be cut it is used by other function s

Best way is to check with a local salvage yard. Lot of times the owners manual gets left in the vehicle when it is scrapped .

Better to pull up the error codes. Following areas can also be checked:
1. Fuel pump control circuit
2. Electronic throttle control system
3. Immobilizer
4. Crankshaft position sensor circuit
5. Short circuit.
7. ECM.

a dc motor runs by voltage the higher the voltage the faster it spins, reversing the power and ground makes the moter fon either clockwise or counter-clockwise i hope this helps if you need more help get bak to me. also must have enough amperage to run the motor, Thanks Ray

you can get them from parts store just ask the cashier

You can download the drivers from the Manufacturer Web Site. You do not mention what brand printer and which Operating System you have ie: Windows7, XP , Home Edition…

Go to the Manufacturer Web Site ie: Epson.com or hp.com etc, and choose your OS and download and install the drivers and software, then restart your computer.

The website will have the software "drivers" for you to download that your printer model's installation CD-ROM originally came with. This is necessary for your computer to recognize what kind of printer you're plugging in to it.

The printer's installation CD-ROM had the exact same drivers that you will be downloading so it will be like if you’re getting the installation CD-ROM again but only via the internet instead of having an actual CD-ROM so don't worry about it.

Some generations of people are terrified of using the internet for no other reason then FEAR of the unknown and that is not my problem. Just be brave.

If you find this information helpful, pls rate me.
Thanks and Good luck. .
************************************************************\
Most computers will have a wizard software.

Follow these step to install printer: turn on computer,,& printer and hook up together
click on "start
"then go to 'setting",
select " printer & fax,
then go to adding----after that the wizard box will display you just follow the instruction to finish your installation.

If you find this information helpful, pls rate me.

CODE FOR UR UNIT IS 7199 PLS RATE THIS THANX.