SOURCE: 2000 kia sephia clutch
this is a big job for someone who is not mechanically inclined but....here it goes go buy a new clutch new tranny fluid and a haynes manual at the auto parts store your going to have to drain and drop your tranny ... BUY THE CLUTCH WITH THE TOOL theres an alignment tool needed to align the plates n bearings start by pulling off both tires, brakes and both cv axels be sure to remove the intermediate shaft from the tranny on the passenger side (should come out with the axel passenger side only) so do yourself a favor and buy an impact gun with at least 500 ft lbs torque youll need it also have handy your 14mm 17mm and 19mm impact sockets and remember this job usually runs around 1,200 bucks at firestone also DO NOT remove the bolt in the middle of the front springs under the hood just the four around it and the will pop out no prob and wont need to be clamped remove the starter behind your engine its under the oil filter also if your new to this sorta thing its gonna take you about 3 days to do it buy the impact gun if ur in a hurry look at a pawn shop have your flywheel machined its going to be accessible and it needs it hope this helps dont forget the book which you should already have bought anyway its good for your torque specs which you will also need a torque wrench for the clutch also dont crack open ur tranny this isnt a honda
SOURCE: location of computer on 2000 sephia
the ECM (computer) is located below right center of dash .
J5
SOURCE: 2000 kia sephia vss location
your vss location is on the top of the transmission towards the firewall. its on the right side of the rear engine mount. but i would recomend looking for it with a flashlight its hard to see.
SOURCE: Where is the spring to my clutch pedal located on my 2000 kia sephia
If we're talking about the same spring, its located inside the transmission. The cable is usually adjustable or sometime stretch. I don't know the problem.
90 views
Usually answered in minutes!
×