1998 Mercedes-Benz C-Class Logo

Related Topics:

David Garcia Posted on Mar 04, 2017

I have a1998 mercedes Benz c230 and wanted to know the purge solenoid location I'm getting a code of p0441

5 Related Answers

Anonymous

  • 7 Answers
  • Posted on Feb 22, 2009

SOURCE: Ballpark price on 2007 Mercedes Benz C230 Maintenance B

The dealer near me charges $365 for a 4-cyl, $395 for a 6/8 cyl, or $425 for a 12-cyl. The only actual repair/maintenance you get for that price is an oil change (with Mobil1 and the MB filter, which are CRITICAL, ~$120 on its own) and tire rotation. This makes a lot of people think it's a scam, but really, it's a little steep, but definitely worth doing. The rest of the service consists of a massive inspection of your vehicle covering the following items.

-- Fluid levels
-- Tire tread/pressure/wheel condition
-- Air filter (inc. clean out housing)
-- Cabin air filter (inc. clean out housing)
-- Lubricate sunroof rails, locks, hinges, and seals on body.
-- Drive belt and tensioner
-- HVAC system operation
-- Instruments, cruise control
-- Wipers/washers/lights/horn
-- Windows/sunroof operation
-- Hoses
-- Transmission fluid
-- Brakes
-- Chassis/suspension
-- Driveshaft, inc. flex discs
-- Road test
-- Reset maintenance light

This is actually pretty essential to do, despite seeming like a lot of money for not much work. I have very rarely done one without catching a few things that the customer needs, and often it was a problem that would have gotten far worse had it been left to its own.

Ad
emissionwiz

Marvin

  • 85242 Answers
  • Posted on Mar 30, 2009

SOURCE: Mercedes-Benz Transmission Fluid question

the transmission on your MB is sealed with no way to check the trans fluid level,(no dipstick provided for) that is why the report says "sealed". MB did this to stop customers from overfilling there transmissions, which can cause severe damage if not done properly at the correct fluid temp, this requires special test scan tools.

Anonymous

  • 19 Answers
  • Posted on Jul 08, 2009

SOURCE: How do you reset c230 2007 mercedes benz resetting

Try this, it is the procedure for resetting the ASSIST computer on many Mercs
1...Turn Key to position No:2 in the ignition / steering lock and immediately press AND Hold the button "000.0" (the trip reset button) TWICE within the space of 1 (one) second.

2…Turn the key to position No: 0 in the ignition / steering lock. Then release the button.
3...Press AND Hold the button "000.0" (the trip reset button) and turn Key to position No:2 in the ignition / steering lock. Keep button pressed
After about 10 seconds
the service indicator will reset and an acoustic signal may briefly sound
That should do it....Good Luck…...Let me know if it works?

Anonymous

  • 203 Answers
  • Posted on Sep 09, 2009

SOURCE: 99 MERCEDES BENZ C230 AUXILIARY COOLING FAN RELAY

I thought they where either on the side of the core support(follow the wire harness and it should go to the relay). If not remove the fuse box lid and then take out the screws retaining the lid housing and you will find a series of relays. There will be one for high speed (engine uses this when temp. is to high) the other is a low speed relay(this is the climate control aux. fan relay) They may have fuses on top of them I know the older models did. I hope I have been helpful.

Anonymous

  • 10865 Answers
  • Posted on Feb 19, 2010

SOURCE: cigarette lighter in mercedes Benz C230 does not

hello. Begin by checking the fuse for this lighter. Chances are that is where the problem lies. Other wise it may be the unit itself which is easy to repair. If you need to replace the unit just go to the auto parts store and get the correct one for your car. It will include step by step directions. Joe

ps kindly rate my answer as helpful. ty

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2003 Mercedes Benz C230 coupe. Where does the FM antenna plug in?

Question edited for clarity.
Question moved to Mercedes Benz C230.

It is the lines in the rear hatch glass. There is a connector the bottom and a plug in the back of the radio.

https://www.google.com/search?q=2003+Mercedes+Benz+C230+coupe%2C+FM+aerial

..
1helpful
1answer

What does this code P0441 mean for engine light on 2004 dodge ram 1500 truck?

2004 Dodge Ram 1500 Truck Code P0441 indicates that a part of the EVAP control system is no longer functioning correctly. The EVAP system consists of many parts, including (but not limited to) the gas cap, fuel lines, carbon canister, purge valve, and other hoses. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.
EVAP emission canister purge is controlled by a valve which allows engine vacuum to pull stored fuel vapors from fuel tank into the engine to be burned, rather than be vented to atmosphere. A vacuum switch is used to detect when flow exists. If the PCM commands purge and sees that the switch is closed (indicating no detected purge flow) P0441 is set.

Symptoms :

Likely, no symptoms will be discernible to the driver, other than the illuminated Check Engine Light.

Causes :

A code P0441 could mean one or more of the following has happened:

Bad vacuum switch Broken or damaged EVAP line or canister Open in PCM purge command circuit Open or short in Voltage feed circuit to Purge Solenoid Faulty purge solenoid Restriction in EVAP solenoid, line or canister Corrosion or resistance in purge connector Bad PCM

Possible Solutions :

With a P0441 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try: Common Chrysler fix - Replace Leak Detection Pump / LDP Repair damaged EVAP lines or canister Repair open or short in voltage feed circuit to Purge Solenoid Repair open in PCM purge command circuit Replace purge Solenoid Replace vacuum switch Repair restriction in Evap line or canister or solenoid Repair resistance in purge connector Replace PCM

I hope this helps.
0helpful
1answer

2005 mercedes benz ml350 i did a smoke test and smoke was coming out from the end of the hose thats at the end of the canister purge valve

the purge valve can get sticky and stick,feel with you hand while engine is running for a like fast heartbeat.If not ,its stuck.Then spray throttle body cleaner in valve at both ends,let dry.Then start engine and check again.you should feel it clicking or with sethoscope hear it.If not replace purge valve.
2helpful
1answer

Reset radio code mercedes c230 how to

i want tape code ?benz c230 tape model cm2299 srial no.2299w0926802b
4helpful
2answers

Common causes for codes p0441

getting code p441 could be caused by evap purge solenoid vacuum line loose leaking or restricted, evap purge solenoid faulty, evap purge vacuum line to canister leaking or disconnected,evap canister failed.
0helpful
1answer

Where is the engine coolant temp. circuit high input located on a 2001 hyundai sonata...code p0441

Trouble code P0441 indicates EVAP emiddion control system incorrect purge flow.
Possible faulty purge valve or circuit.
Possible causes: purge line plugged, vacuum hose failure, EVAP purge solenoid failure and/or emission canister clogged.

The coolant sensor is a 2 wire sensor located in the thermostat housing.
3helpful
1answer

How do I fix p0441.

A code P0441 could mean one or more of the following has happened:
* Bad vacuum switch
* Broken or damaged EVAP line or canister
* Open in PCM purge command circuit
* Open or short in Voltage feed circuit to Purge Solenoid
* Faulty purge solenoid
* Restriction in EVAP solenoid, line or canister
* Corrosion or resistance in purge connector
* Bad PCM

Possible Solutions: With a P0441 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:
* Common Chrysler fix - Replace Leak Detection Pump / LDP
* Repair damaged EVAP lines or canister
* Repair open or short in voltage feed circuit to Purge Solenoid
* Repair open in PCM purge command circuit
* Replace purge Solenoid
* Replace vacuum switch
* Repair restriction in Evap line or canister or soleniod
* Repair resistance in purge connector
* Replace PCM

Hope helps (remember to rate this answer).
0helpful
1answer
3helpful
2answers

P0441 EVAP Control System Incorrect Purge Flow

Error Code: P0441
Fault Location:
Evaporative Emission (EVAP) System - Incorrect Flow Detected
Possible Cause:
Malfunction Indicator Lamp (MIL) active.
Evaporative Emission (EVAP) Canister Purge Regulator Valve faulty/jammed.
Evaporative Emission (EVAP) Canister Purge Solenoid Valve faulty/jammed.
Evaporative Emission (EVAP) Canister Sealing faulty.
Pipes between Tank Breathing and Throttle Body leaky/blocked.
Hose connection(s).
Intake leak.
Possible Solutions:
Check Evaporative Emission (EVAP) Canister Purge Regulator Valve .
Perform Output Test.
Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve.
Check Evaporative Emission (EVAP) Canister.
Perform Basic Setting.
Check Pipes between Tank Breathing and Throttle Body.
VSV connector near air filter box disconnected.
6helpful
2answers

Merces benz c230 timing chain replacement procedure

so it takes some Pin pullers, or a litlte bit of messing around witth proper sized (heavy duty) bolt to pull the pins, i cannot seem to find the timing marks on mine once i got it offand want to put back on, i have a chilton and it doesnt help. if you buy the 100 -200 dolar shop manual from bentley it would probably be quite simple :)

pull, pins, timing cover, water pump, solenoid, etc. to get to timing cover, uppe and lower,pull valve cover, and loosen cam (exhaust side) to get chain off. :)
Not finding what you are looking for?

108 views

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...