2001 Chevrolet Tahoe Logo

Related Topics:

Ted haller Posted on Mar 05, 2017

Have 2001 Tahoe and removing radio instrument cluster fuse in the birthdates battery tray how do I fix

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Aug 14, 2009

SOURCE: instrument panel cluster gauges and odometer has stopped working

I had all my analog instrument panel gauges stop working after they did the state emissions test. I found the proper fuse in the fuse block located under the hood. Simply unplugged the fuse, noticed it was still good, and plugged the same fuse (10A) back in and all the gauges started working again. Guess it needed a reset atfer they plugged in for the emissions.

Ad

Anonymous

  • 1 Answer
  • Posted on Nov 24, 2009

SOURCE: Instrument cluster does not work except oil pressure and voltage

I actually had the exact same thing happen to my 2001 Silverado and I bought an instrument cluster too. It was the 10A radio fuse in the fuse panel beside the dash. It was not pushed in all the way.

Anonymous

  • 10 Answers
  • Posted on Feb 23, 2010

SOURCE: Instrument cluster not working

if its not a fuse. try a relay. itll be under the hood in a little box. if thats not it than it could be a short in the wiring.check your running lights as well. most of the time they are ran on the same fuse so if one doesnt work the other one probably wont. also if you have recently replaced your stereo. check over the wiring on it because something could have got loose.

Anonymous

  • 480 Answers
  • Posted on Dec 23, 2010

SOURCE: how I can fix my Instrument Cluster for 2003 chevy

most of the more modern instrument clusters are solid state meaning theres pretty much nothing to fix on then when they break unless your good with electronics repair, its easyer to just replace the unit with one out of a salvage yard.

Gulfrano Galvan

  • 1 Answer
  • Posted on Sep 03, 2011

SOURCE: Instrument cluster lighting

I have same problem did u get a solution

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Instrument cluster not working and climate control stuck on defrost after a new radio install (and its not working). No blown fuses and all wiring is not burnt or crossed up. 2001 Chevrolet Tahoe

Try putting the old radio back in there might be a can fault . If it all works with the old radio the all you have to do is join the can wires.
1helpful
2answers

Changed the battery in my 03 tahoe, now none of the guags work

Your best bet have the instrument cluster tested . Hooking it up to a factory scanner is the best first diagnostic step . Checking for DTC'S - diagnostic trouble code's . Checking cluster data , all gauge info. come's from the BCM or PCM over the class 2 serial data network . Class2 data is a communication network for the control modules . Are their any light's lit on the instrument cluster ? Check engine , ABS , Air bag etc..... GM also had instrument cluster problems from 2003 to 2006 , stepper motor's that drive the gauge needls , silver migration -google that one.
How to repair GM Instrument Cluster Speedometer Gauge Stepper
0helpful
1answer

How do I remove the instrument cluster dimmer switch in my 2000 Lincoln town car

Switch - Panel Dimmer
Special Tool(s) syg~tr~en~file=st1445a.gif~gen~ref.gif Radio Removing Tool
T87P-19061-A Removal
  1. Disconnect the battery ground cable
  2. Pull out the radio using Radio Removing Tool.
  3. Remove the radio.
    1. Disconnect the electrical connectors.
    1. Disconnect the antenna cable.
    1. Remove the radio.
    2. Remove the instrument panel finish panel bolts.
    3. Remove the instrument cluster finish panel bolts.
    4. Pull out and position aside the instrument cluster finish panel.
    5. Disconnect the electric clock electrical connector.
    6. Remove the instrument cluster finish panel.
      1. Disconnect the headlight switch electrical connector.
      1. Disconnect the dimmer switch electrical connector.
      1. Remove the instrument cluster finish panel.
      2. Remove the dimmer switch.
        1. Remove the screws.
        1. Remove the dimmer switch.
    7. Installation
      1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
        To install, reverse the removal procedure.
0helpful
2answers

Changed battery on 2001 olds silhouette and now the instrument panel and radio don't work. Any suggestions?

NEED RADIO UNLOCK CODE TO RESTORE RADIO
IPC INOP. SOUNDS LIKE IP CLUSTER IT'S SELF, COMMON ISSUE
0helpful
1answer

Hello, Im a US Marine and dont know alot about automotive but Im not completly numb... My father in-laws 2003 4x4 dodge pick has been blowing fuse #18 which when blown or removed the dash lights go out......

That fuse also supplies illumination to the radio, hvac controller, cup holder and cigarette tray. I think the best thing to do is start unplugging each one of these until the fuse stops blowing. Then plug the last think in that you unplugged to make sure that makes the fuse blow. If you suspect the instrument cluster start with that first.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

0helpful
2answers

Was driving last night notice oil pressure drop to 0 . Check the oil this morning it is fine and the gauge is reading 40. What can be the problem

Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Tahoe instrument cluster repair

1helpful
1answer

How do I replace dimmer switch on 2001 Tahoe?

Removal & Installation (If dimmer is on headlamp switch area) To Remove:
Instrument Cluster Bezel removal chevy_sub15_02-04_instrum_clust_bezel_rem.gif

  1. Remove or disconnect the following:
    • The instrument cluster bezel
      1. Unsnap the switch from the housing
    • The electrical connectors Headlight switch removal chevy_sub15_02-04_headlight_switch_rem.gif

    • The switch
To Install:
  1. Install or connect the following:
    • The electrical connectors
    • The headlamp switch by snapping the headlamps switch into place
    • The bezel to the instrument panel
  2. Operate the headlights to check performance
prev.gif next.gif
5helpful
2answers

Speedometer dont work

Often in 03-06 Chevy Tahoes the instrument cluster will start to go out one gauge at a time. This is due to the stepper motors failing, to find out how to fix your tahoe instrument cluster check out this page Tahoe instrument cluster fix
1helpful
3answers

When driving, all my gauges, except the battery, go all the way to the left...

Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Silverado instrument cluster repair
Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Tahoe instrument cluster repair

7helpful
1answer

Remove a 93 Golf 3 VR6 Dashboard

  1. 5b63f60.jpge173e8a.jpg
  2. On Cabriolet with an air bag, disconnect the negative battery cable and wait at least 20 minutes for the back-up power supply to discharge. Make sure no one is in the vehicle when connecting the battery. Unintended deployment of the air bag can cause serious or fatal injury.
  3. Disconnect the negative battery cable.
  4. Remove the gear shift knob and boot and remove the center console.
  5. Remove the steering wheel.
  6. Remove the knee bar from below the dashboard.
  7. Remove the steering column support bracket and lower the column.
  8. Pull the knobs off the heater controls and remove the control assembly and the radio.
  9. Remove the headlight switch and switch blanks to gain access to the screws. Remove the instrument cluster and trim panel around the cluster.
  10. Remove the glove compartment.
  11. At the firewall, remove the plastic tray and remove the 2 nuts holding the top of the dashboard.
  12. .Remove the main fuse panel and disconnect the plugs at the back. Disconnect the ground wires.
  13. Disconnect any remaining wiring from the dashboard and remove the 4 last screws; 1 at each end and 1 at each end of the instrument cluster area. Remove the dashboard.
To install:
  1. Fit the dashboard into place and start all 4 screws, then tighten them.
  2. Install the fuse panel and connect the wiring.
  3. Secure the steering column into place.
  4. Install the switches and instrument cluster.
  5. Install the heater controls and radio.
  6. Install the console and connect all wiring.
  7. Connect the battery to test the electrical system.
  8. Install the steering wheel, knee bar and all remaining components.
Good luck...
Not finding what you are looking for?

521 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29492 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...