2001 Dodge Neon Logo

Related Topics:

T
Tamra fulgham Posted on Mar 06, 2017

Trying to find out size the center bolt on hermonc balancer is, for 2001 Dodge neon and how to get hermonc balancer back on

5 Related Answers

ahill_1

Big A's Auto Repair

  • 755 Answers
  • Posted on Jan 01, 2009

SOURCE: 2001 Dodge Neon Power Locks don't work.

Hi my name is Allen!

You need to first check all your fuses!

Question: Do the locks not work from the driver or the passenger switches, if they do not work from either switch then its a power or ground problem. If they do work from one of the switches then you need the switch that went bad.

Let me know what you find, and we will take it from there!

Waiting for your reply!

Ad

Anonymous

  • 702 Answers
  • Posted on Jun 30, 2008

SOURCE: removing a starter

Yes, you'll have to remove the bracket.

Anonymous

  • 521 Answers
  • Posted on Jul 18, 2009

SOURCE: 2001 Dodge Neon won't start. says "fuse"

check all you r fuses. There should be 2 sets, one under the hood and another in the passenger area(driver side under dash usually)

seanpwright

Sean Wright

  • 2045 Answers
  • Posted on Jan 12, 2010

SOURCE: I need a wiring diagramfor the stereo on a 2001 dodge neon

Sorry to say there isnt one available (if its the factory stereo)...the only diagrams available would be for the wiring in the up to the connector at the back of the radio

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Anonymous

  • 7 Answers
  • Posted on Jul 18, 2010

SOURCE: what size drain plug fits on a 2002 dodge neon?

Your best bet will be to go to a salvage yard and take one off one of the Neons there, with permission from the owners. Just any plug won't do. The bore size and threadding have to be exact, or the pan will leak.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

Why is it hard to get balancer pulley off 98 neon? Tried a pulley puller and impact. Still no luck. What should I do?

Did you take out the center bolt? You have to remove the center bolt, then use a harmonic balancer puller. Not the two or three armed pulley puller, but a harmonic balancer pulley puller-the pullers with jaws that hook around the outside of pulley can ruin a harmonic balancer.
Use the impact gun to remove the center bolt. You won't need an impact gun to remove the balancer pulley. The balancer puller will take it right off the crankshaft, no problem.
0helpful
1answer

2001 dodge stratus r/t 3.o liter outside pulley on harmonic balancer fell off. do i need whole new balancer or is there something that came off that holds it on?

ON most engines there is only on pulley as part of the harmonic balancer. It is the on that has the rubber between the pulley and the center bit on the crank. Any other pulleys are normally bolted to this pulley on the center hub piece . I'm thinking that the mount bolts have fallen out.
0helpful
1answer

How do i get the old tension pully off of my 00 plymouth neon

Hello.
There should be some bolts that hold the pulley on to the motor. Check behind the bracket, I believe they are the bolt size of 9/16. If you are trying to get the serpentine belt off, you can also just have someone hold the pulley away from the belt as you maneuver the belt off the pulleys.
Hope this helps! -Steve
0helpful
3answers

My 1996 dodge neon's crank balancer will not come off. i need to take this off to get the timing belt off. to fix a blown headgagsket.

Take everything in front of it off.  Use a long breaker bar and socket, 1/2" drive, 3/4" if you have one.  Put the socket on the nut and the bar across to a piece of the frame.  BUMP the starter.  DO NOT CRANK IT.  This will break the nut loose.
1helpful
1answer

Trying get at the belt tesion bolt n a 2003 dodge neon 2.0L

remove the harmonic balancer. you have to have a special puller. it is a three prong puller that uses a center pin. you cant remove it without this puller.
0helpful
1answer

I am changing out a locked up water pump in my 97 neon, i have got to the point to where i have to take off the crankshaft pulley because i have a dohc and the cover goes around the crank shaft, I am...

if you can remove the bolt on the lower side of the balancer you will be able to push the shield up enough to get clear to change the water pump
0helpful
1answer

Removing a starter

Yes, you'll have to remove the bracket.
Not finding what you are looking for?

90 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...