SOURCE: how to collapse rear calipers
Open bleed valve,use a piston tool, to
turn parking brake in,as you push piston
back into caliper
The piston should screw in clockwise
That is the parking brake feature
The piston also has to be retracted ,as on the front
After the pads are on, ratchet up the P-Brake
to tighten pad clearance
You don't need to open bleeder, but it is easier,
and you absolutely have to flush brake fluid on ALL
vehicles every 2 years
Testimonial: "thanks, ps where can i purchase that tool? thanks phil"
SOURCE: can i get a dummy
i am not sure but i know that you can get a belt that will be shorter so that you don't have to put the belt on the ac condenser
SOURCE: 3rd piston is missfiring on
Start by checking for OBD2 Codes
Use the code to diagnose the misfire
Codes for a misfire may not tell you what is wrong,
so a repair shop would be your best bet
You can put a new coil in #3,but if that doesn't help,
put the old one back & take the new one with you,
to a mechanic
SOURCE: ac condenser replacement
The lines are held on by internal springs over a lip on the line you need this tool kit to release them. Most auto part stores like NAPA have this tool kit, it is less than $10.00 I think
SOURCE: tail light not working brake works
Liz the 2 most common things are blown out bulbs, or a blown fuse, if you take it to your local auto parts store most will help a woman in distress with quick fixes to get you to come back as a reg, customer.Or if you or a friend are handy both are pretty easy to fix ,check your manual in your glove box, that will tell you how to replace both items.
787 views
Usually answered in minutes!
×