SOURCE: DRL and High Beam do not work right on Honda Accord EX 1998
Some time back I found some data on a similar website suggesting that the Day Light Running circuit board, just under the steering column, developed cracks in some of the soldered joints. Your high beams should also be affected with loss of day light running lights.
Resoldering repaired the continuity of the circuits. Ours is now working quite reliably. Some of the defective areas developed slight brownish discoloration, that's how I was told to recognise the areas to be resoldered. Hope this will help you solve your problem.
SOURCE: When I turn ON the headlights dash lights go off
your multi function switch is non responsive it will need to be replaced.
SOURCE: What does orange/yellow light indicator
Means that the recirculation feature is ACTIVE. What this does is take the cabin cooled air, and re-cool it again, using very little fresh air from the outside, and allowing the air conditioner to work much cooler and efficient. Not advisable if you have a full load of passengers, and absolutely recommendable if you are going through long tunnels, or behind vehicles with visible tailpipe smoke. Keep me posted.
SOURCE: High beam headligts will not come on + no dash
Hi Pete, I just come from the auto electrician and I have a Mazda 3 SP23 2008 and the high beam is not working, the globes are fine and the column switch is working and the low beam, parking lights, dash lights, internal fuses, reverse lights, rear lights are working. Just the power is not getting to the fuses underneath the glove box (internal fuse box) any suggestions? cheers Kim
87 views
Usually answered in minutes!
×