SOURCE: trying to read error codes 98 pont/sunfire 2.2l
You can't read the codes this way on 95 and newer cars and light trucks (OBD 2 system), you will have to either go to a Kragen auto where they will do it for free or buy a cheap code reader for about $30-40.
SOURCE: my 98 sunfire starts then
This is most likely your crank position sensor.... it sits behind your harmonic balancer and tells the PCM what position the crank shaft is at at all times. These sensors aare around 30 dollars at a local parts shop but you will need a pulley puller and a good impact wrench to remove the balancer
270 views
Usually answered in minutes!
×