2000 GMC Jimmy Logo

Related Topics:

Andy Stoops Posted on Mar 10, 2017

I have 2000gmc jimmy the cruise control works intermittenedly what is wrong with my cruise?

4 Related Answers

Anonymous

  • 405 Answers
  • Posted on Jul 05, 2008

SOURCE: 2000gmc jimmy

When confronted with a P0442, many techs impulsively replace the cap, as it has been found to be responsible for a fair number of large-leak evap DTCs. Caps that are incorrectly installed following a fill-up also contribute to this problem. But as you know, vehicles with enhanced evaporative emissions systems, are very sensitive and will detect leaks that are much smaller than those resulting from a defective or loose cap. In fact, leaks as small as .040 in. can be detected.

Ad

Anonymous

  • 1608 Answers
  • Posted on Dec 18, 2009

SOURCE: cruise control stopped working on my 93 sierra

The only other thing that is the turn signal handle.This is the switch.It can be removed by making sure it is in the off position and pull straight out.Depending on which kind of handle it is.The wire connector is either right by the area where you pull it out or under the dash.Just follow the wire.Hope this helps.Good luck.

Anonymous

  • 1949 Answers
  • Posted on Feb 25, 2011

SOURCE: cruise control light on my

check relay in fuse box under hood bad for sticking

Anonymous

  • 297 Answers
  • Posted on Jun 05, 2011

SOURCE: 2000gmc jimmy stalls when you push the brake when

There are a few things to check: First, check the fuel filter to see if it's clogged. Next, clean out the air filter. Next, look and see if the spark plugs have fouled, or are bad. Spray in some injector cleaner, and maybe some SeaFoam if you believe in it (I do, heavier based oil should push it out, if not all that powerful as it claims). Check the timing, and check the valve timing. You might even do a vacuum check on the intake. Failing that, it's time for help with the computer, or it may be a worn out motor.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2000gmc Jimmy won't shift into overdrive

https://eautorepair.net/Marketing/Default.asp


RTM
THE ELECTRIC PATH FOR OD IS THERE.
and varies by what transmission version was installed new.
RTM
0helpful
1answer

Where is the fuse panel that controls cruise control on a 2001 jimmy gmc

It may be in the fuse panel under the hood. If it is ok, check the cruise control kick out switch operated by the brake pedal. If mis adjusted or knocked out of position cruise will not work.
0helpful
1answer

What causes my cruise controll to not work intermittenly

cruise control starts working above 50kmh, so if your under that it wont work. the cruise servo may be at fault, or I have seen battery acid leak down on the vacuum lines causing cruise not to work correctly. cruise control works off of a vacuum so without it, it wont work. if the cruise light doesn't turn on when pressing the set/cruise button intermitantly it may be the switch itself that is starting to fail
1helpful
1answer

My cruise control works intermittenly. no pattern. sounds like a relay but where?

in the fuesbox underneath the hood (most likely, might be under dash) there will be a series of relays, the diagram on the fusebox cover will tell you which to replace, although intermittent issues generally do not point to relays, relays fail once, contacts in your cruise control buttons, and wiring issues are more likely at fault
1helpful
1answer

Cruise control only work intermittenly what could

Cable is shorting out then making contact which is letting it work for a short period, look under your car about where your speed-o is and you should be able to find it, you will most likely find it has ben rubbed or touching somehting that gets hot under there.
3helpful
2answers

The cruise control just quit

By removing the ABS brake fuse you are disabling other components as well. The ABS fuse supplies voltage to the brake switch that tells the ECM and ABS module the the brake has been applied. If neither of the modules can see the brake switch the cruise control will be electrically disabled. You need to reinstall the fuse.
Let me know.
Regards,
0helpful
1answer

Intermitten problem with cruise control

How did you "re-work" switch??? Why???
0helpful
2answers

98 plymoth grand voyager cruise control

there was a recall for an air bag problem which also fixes the cruise control and horn (clockspindle in steering wheel)
Not finding what you are looking for?

164 views

Ask a Question

Usually answered in minutes!

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...