Changed fuse #25 on my Chrysler 300 2005 now car wont start

SOURCE: The car cranks but won't start

Ok, check the following below--

1. Check the Ignition control Module for its operational value. it may be damaged.

2. Check the coils.
3. Check the plugs and wires.
4. Check the ECM/PCM/ECU(All represent the same device that is commonly known as the engine control computer)

Check these areas thoroughly for faults. I would also advise to replace the fuel filter and fuel pump as well.

SOURCE: chrysler wont start

I CHANGE CAM AND CRANK SENSOR,FUEL PUMP,COMPUTER BRAIN BOX AND COIL PACK STILL GETTING NO FIRE UNLESS I JUMP A FIRE WIRE FROM BATTERY