How about a key ?
Luggage Compartment Description and Operation (Sedan)
Rear Compartment Lid Release
The rear compartment lid can be released in one of three ways:
• Inserting the key into the key lock cylinder, if equipped
• Operating the rear compartment lid release switch
• Using the keyless entry fob
To operate rear compartment lid with the rear compartment lid release switch or with the rear compartment release button on the key fob, the gear selector may be in any position, but vehicle speed must equal 0 for the rear compartment lid to release.
When the rear compartment lid release switch is pushed, the rear compartment lid release signal circuit to the body control module (BCM) is grounded. BCM then grounds the coil side of the trunk release relay through the trunk release relay control circuit. With this voltage is applied to the rear compartment lid release actuator, opening the rear compartment.
do you know how to do electrical testing ?
Circuit/System Verification
Ignition ON, observe the scan tool Trunk Release Switch parameter while pressing and releasing the rear compartment lid release switch. The parameter should change between Active and Inactive.
? If the parameter does not change, refer to Trunk Release Switch Malfunction.
Command the trunk release with a scan tool, the rear compartment lid latch should release the trunk lid.
? If the rear compartment lid latch does not release, refer to Rear Compartment Lid Latch Malfunction
You may want to take it to a repair shop .
318 views
Usually answered in minutes!
×