Resetting radio I changed battery and now the radio plplay won't play its a 99suzuki vitara

it's bricked, , the 6 ways, are here.

http://www.fixkick.com/power-elect/Keep-Alive/keep-alive.html#radio

good luck finding a Suzuki car dealer, they bugged out.

Try disconnecting battery. Then re-connect the battery and type in the correct code.

You could try the factory default code, which is 0000. There is some confusion whether Suzuki/Clarion produces these audio units with a preprogrammed lock code (0000) or not, but its worth a try. If a previous owner has set their own personalized code then there is absolutely NO way for you to work around it. The audio unit will have to be removed and returned to Clarion for reprograming. A Suzuki dealer can help you with this, but they can not unlock the radio, only Clarion has that ability.

in the USA,
there are 3 ways on all cars.

1. press reset on the scan too.
2. pull battery neg lug, and lose the radio , and nav. codes,
3. pull the ecu memory fuse. (no engine stated, so can answer)

limp mode means something is broken, with
PCM or TCM. (bad sensors or actuators)
resetting PCM.
1: press reset on scan tool.
2: pull memory fuse to ECU.
3: pull battery neg lug and radio bricks and need to do relearn modes. on many things.

if the problem remains, resetting it does nothing, it come back fast.

SUZUKI GRAND VITARA SERVICE REPAIR MANUAL 2005 2008 DOWNLOAD

for the easy solution download the pdf file

use a scan tool to reset the ECm

may have other problem, sensor going bad.or reset onboard computer by disconnection of positive cable on battery for 5mins this will reset @ make light go off but if problem exists light WILLcome back on.. hope this helps!!!!

My wife left the ignition on with the lights on and drained the battery completely. I'm having the exact same problem. Any ideas how to fix it?

disconnect the battery for about 30 secs. this will clear out the ECM (computer) and will reset that light for you.

get the radio code from the dealer.