2008 Dodge Grand Caravan Logo

Related Topics:

How do you test a rear wiper module on a 2008 Dodge Grand Caravan ?

Under the fuse box are the fuses & modules. How do you test a module ? The rear wiper has stopped working but the rear wiper fuse is OK. I understand how to replace the wiper motor if necessary.

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Feb 08, 2009

SOURCE: were is the fuse box in a dodge grand caravan 2003?

i have a 2002 caravan and the turnsiginals are only working inside the dash nothing outside has new bulbs and still nothing anyone any ideas?

Ad

Anonymous

  • 95 Answers
  • Posted on Mar 30, 2009

SOURCE: Replace the front wiper motor 2000 Grand Caravan Dodge

It is on the firewall under the hood. It has 3 to 4 bolts holding on. Be careful when taking it out to see how the new one lines back up. Hope it helps.

jakeburningh

  • 2 Answers
  • Posted on Sep 19, 2009

SOURCE: NEEED FUSE FUSE BOX LAYOUT FOR 2003 DODGE GRAND CARAVAN

You can get free owners manuals online at:

http://www.edmunds.com/ownership/howto/articles/120189/article.html

or just type "owners manuals" in your search.

Here is a post I found that worked for my 2005 caravan.

For a 2001 Dodge Caravan: The owner's manual is vague, only stating that all fuses are under the hood in the fuse box, no diagrams. Once you have removed the fusebox cover, the diagrams for what each fuse does is provided under the lid. UNCLEARLY marked is the radio fuse, a 20amp fuse located 2nd row from top to the right of the accessory relay. It is marked: RDO/IP IGN.

Jake

Anonymous

  • 149 Answers
  • Posted on Jan 19, 2010

SOURCE: 2002 dodge grand caravan fuse box

The fuse box is located under the hood. There is component map printed on the inside of the cover. This tells you on your model where the fuse or relay is located

Anonymous

  • 3 Answers
  • Posted on Jul 24, 2010

SOURCE: 2003 dodge caravan won't start

My 2003 dodge caravan would not start after driving about 1/2 hour. I stopped for coffee and when got back in to start it started I switched gears and it stalled. I tried to start again switched gears then it started but only for 2 sec. No clicking, no cranking sound just would not start but battery functions were great. Spent 2 days with a mechanic who could not resolve so sent to Dodge. After a day of putting wires back and checking out the problem they said it was the computer. Said that it was bad and could be replaced at no charge due to malfunction. Yes, it worked fine afterwards no more problems. They also said that some of the computers are found to be defective like this one so I hope this helps you in the right choice to have the dealer check it out if you are unable to get a computer reading and there is no obvious short in the system. Free sounded very good but as you know there is no such thing as really free as they got me for other things $350 worth. ouch!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What fuse do I replace in a 2005 Dodge Caravan?

Yes there is just the Integrated Power Module and there is no fuse for the centre console. Check Fuse 17 as that is the Body Control Module. In all likelihood you will need and auto-electrician with a pro grade scan tool computer to find why the power is lost to there.

Fuse Box Diagram Dodge Caravan (2001-2007)

https://fuse-box.info > dodge > dodge-caravan-2001-20...
Fuse Box Location ... The Integrated Power Module is located in the engine compartment near the battery. This center contains maxi fuses, mini fuses and relays. A ...
1helpful
1answer

Changed fcm lights worked for 2 weeks now they dont 2004 dodge grand caravan

Hey had this same problem last year. turned out all the contacts under the power control module were eroded away causeing a short to burn out the FCM, easy fix but OE parts ran about 1000$ for all. might be something to check.
0helpful
1answer

Electrical problem: Wipers, lights, horn all operate. Locks go up and down. Sitting in driveway, rain or shine, hot or cold. There is no consistency when it happens. The only way I can get it to stop is to...

Hitting the fuse box ? Inside the fuse box is what chrysler ,dodge ,jeep call the TIPM - totally integrated power module . This module controls all the thing's you say are not working . I not surprised they said they couldn't find anything wrong . Should be a recall on this part .

Defective TIPM Is Causing Dangerous Power Problems in Chrysler Vehicles
3helpful
1answer

I have a 2004 dodge caravan the headlights wil not work nor the windshield wiper fluid pump. I checked all fuses and relays and all appear to be good. the lights will come on at times when I hit the ...

The problem is likely your FCM which is a module that is attached to the
front of your fuse box . Go here for more info http://www.topix.com/forum/autos/dodge-grand-caravan/TFGKS9O3LLH1ABOBM
1helpful
2answers

Air bag light is on 96 grand caravan

i may be mistaken on if this applies to your model year but if the rear wiper does not work then check the fuse for rear wiper and replace if blown. make sure rear wiper switch is off and wiper is parked.if air bag light goes out after a few seconds then the rear wiper motor is bad causing fuse to blow. air bag module gets power for its fuse through wiper fuse.if wiper is not parked then fuse may blow when you turn yhe key on.you have two choices. replace wiper motor or remove tailgate door panel and unplug the motor
0helpful
1answer

Right turn signal activated washer pump. was intermittent, now...

Which electronic control module did you replace ? The washer pump is controlled by the front control module . Located in the integrated power module . Fancy name for the under hood fuse / relay box.
Do you know what a wiring diagram is ? How to read one ? Here is a web site for free wiring diagrams . http://www.bbbind.com/free_tsb.html Enter vehicle info . year ,make ,model an the engine size . Under system click on body & accessories , then under subsystem click on wiper/washer .Then click search an a link will pop up . Click on it , second diagram you'll see you front washer pump an the module that controls it .There could be a short to ground on the brown wire , or a problem inside the fuse box . Do you know how to do automotive electrical testing ? Automotive Electrical Fault Finding
How to Use Multimeter to Troubleshoot Common Problems
The Trainer 18 Electrical Testing Tips


Not finding what you are looking for?

294 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...