The location of body control module on 2008 Chevy Equinox LT with 3.4 engine 2 wheel drive vehicle

Fuse Box Diagram Chevrolet Equinox (2005-2009)

https://fuse-box.info > chevrolet > chevrolet-equinox-2...

The fuse box is located under the dashboard on the passenger's side of the center console, behind the cover. The location of the fuses in the passenger ...

2008 Chevrolet Equinox fuse box diagram - StartMyCar

https://www.startmycar.com > Equinox > Fuse box
The 2008 Chevrolet Equinox has 2 different fuse boxes: Instrument Panel Fuse Block diagram. Engine Compartment Fuse Block diagram. * Chevrolet Equinox fuse ...

Probably caused by the electronic throttle control . How many miles on the vehicle ? The gas pedal has position sensors that the PCM - engine computer uses to know how much to open the throttle plate .
Drive by Wire Function and diagnostics by Wells
What engine ?
The throttle actuator control (TAC) system is used to improve emissions, fuel economy, and driveability. The TAC system eliminates the mechanical link between the accelerator pedal and the throttle plate. The TAC system eliminates the need for a cruise control module and idle air control motor. The following is a list of TAC system components:
• The accelerator pedal assembly includes the following components:
- The accelerator pedal
- The accelerator pedal position (APP) sensor 1
- The APP sensor 2
• The throttle body assembly includes the following components:
- The throttle position (TP) sensor 1
- The TP sensor 2
- The throttle actuator motor
- The throttle plate
• The engine control module (ECM)

https://s1.postimg.org/w2rgr091b/bcm.jpg

Click on the link, hope it helps.

This is a computer controlled system (BCM) supply's power to switch .Voltage is supplied to the cruise control switch via the steering wheel control switch reference voltage circuit supplied by the BCM.
The following are the main components of the Cruise Control System:
• The accelerator pedal
• The stop lamp switch
• The body control module (BCM)
• The cruise control switches
• The engine control module (ECM)
• The throttle actuator control (TAC) motor
• The vehicle speed sensor (VSS)

Taking your vehicle to a quailfied repair shop would be your best option . Using a factory scan tool to view input data from switches and sensors is the only way to diagnose the cruise control on your vehicle . Just replacing parts does not cut it .

The body control module (BCM) monitors the signal circuit of the cruise control switches. The BCM relays the cruise control switch status to the engine control module (ECM) via the GMLAN serial data circuit. The ECM uses the status of the cruise control switch to determine when to capture and maintain the vehicle speed. The ECM monitors the vehicle speed signal circuit in order to determine the desired vehicle speed. The ECM uses the throttle actuator control (TAC) motor in order to maintain the vehicle speed. For further information on the TAC System, refer to Throttle Actuator Control (TAC) System Description .

This is not a fuse problem !!!!!!!!!

You probably don't know what GMLAN serial data is ,do you ? It's GM 's version of C.A.N. How to Diagnose Controller Area Network CAN

Its time for the all wheel drive to be serviced ,A top up or system fiush

The AWD Equinox has two model selections (LS & LT) and two 2.4L engine options (K2.4L FI DOHC & the K2.4L Flex Fuel DOHC.)

Information on the Equinox engines oil pressure senders location is difficult to find on line so all I can offer in the way of help is to say that It will be on the engine block connected to the ECM (engine Control Module) with a single TN/BK (Tan/Black) wire lead.

The Oil Pressure Sender is a distinct looking unit that is sold by Autozone and they provide pictures of the various makes which should help you identify the units location on your engine block.


Gauge Sender

Could be out of alignment or a wheel sensor. If you take it in for an alignment it has to a shop that can deal with traction control sensors. The days of old wheel alignments are gone. IF the computer senses the wheels out of alignment then it believe the vehicle is slipping and gives an error.

Not that I'm aware of u should be able to pop out the switch from the column

i have chevy equinox 2007 LT with AWD system, my problem is that i have two messages appearing in the DIC : satbilitrack and service tracktion control. can u help me with this and tell me whats the problem and how should i fix it?

Hello and welcome. the engine reduce power waraning is the key to the other problems. this is normally a problem with the electronic throttle system. the engine control module disables the traction control system when it detects a engine problem, in your case a problem with the electronic throttle system. you shouldnt drive with this concern. this is normally covered under the vehicles 100,000 mile warranty. you need to conteact your nearest dealer for help