2002 Mitsubishi Lancer Logo

Related Topics:

R
Robert newman Posted on Mar 26, 2017

I've lost my remote for 2002 lancer. When I open door with key, alarm goes,off. How do I stop it and use the car until I can get a replacement remote

5 Related Answers

Anonymous

  • 203 Answers
  • Posted on Nov 21, 2008

SOURCE: remote not working how to manually disarm alarm

did you get a different key for your alarm box if not thy the ignition key. joe

Ad
alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Nov 28, 2008

SOURCE: new battery, can't reset alarm

remove the alarm,their might be a passive switch on the alarm to turn it off with a special key,if you dont have the key break the lock so you can turn it off or try to open case of alarm and look at wires and then dertimine which ones to join or break,every alarm inside is different so you will have to work it out.

Anonymous

  • 372 Answers
  • Posted on Jul 28, 2009

SOURCE: replace my control remote for my ignition started & alarm system

there should be a button some where that you can push while the key is in the on position and it will stop the alarm for that ignition cycle. Then i reccomend taking the alarm out or take it to a reputable electronics shop and they can tell you what manufacture and model is.

Anonymous

  • 160 Answers
  • Posted on Jan 06, 2011

SOURCE: I have 2002 eclipse spyder

im not positive..but...i know for my old car...if i locked doors as i was getting out with power switch..it set the factory alarm.
if u dont want to set the alarm..close the locks manually.

Robert Bivins

  • 192 Answers
  • Posted on Oct 28, 2014

SOURCE: I bought a 2010 lancer my key is a remote with a

This is typically done at the dealership. IF the car is still under warranty, most dealers will do this for free. Otherwise there will be a charge. I'm assuming this is a factory alarm. If not, you must go to the alarm company for help.

I hope this helps,
--Robert

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do i disengage the alarm system in a 2002 dodge stratus?

lock all doors then use key in front passenger door to unlock. that disables the alarm

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_a3369546f8067589

0helpful
2answers

How do I turn off the door alarm on my 2002 Chrysler PT? When I put the key in and unlock the door, the alarm goes off and doesn't stop until I turn the ignition on.

this is a standard warning to tell you the keys are in the ignition to help prevent them from being locked inside. This is a factory alarm and cannot be turned off
0helpful
1answer

Lost keys and keyless remote

you must go to dealer and have akey made because the one you lost probably has a theft deterant by pass built into key thats why it wont start you have a computer chip in your original key that by passed alalrm and it would start ur car they will need ur vin number
0helpful
1answer

2002 VW Golf TDI open door light & alarm

check door switches remove 1 at a time and unplug it once you find the bad switch lights will go out
un plug 1 at a time
0helpful
1answer

Replace my control remote for my ignition started & alarm system

there should be a button some where that you can push while the key is in the on position and it will stop the alarm for that ignition cycle. Then i reccomend taking the alarm out or take it to a reputable electronics shop and they can tell you what manufacture and model is.
10helpful
3answers

Program remote control for mazda mpv 2002

Courtesy of: forums.mazdaworld.org

Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done
0helpful
1answer

Remote not working how to manually disarm alarm

did you get a different key for your alarm box if not thy the ignition key. joe
Not finding what you are looking for?

203 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...