1996 Acura TL Series Logo

Related Topics:

Where is knock sensor located on my 1996 acura TL

5 Related Answers

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Feb 28, 2009

SOURCE: Where is the starter located on a 1996 Acura 2.5 TL?

it is at the rear bottom of engine, points inside the bell housing of the transmission, u will need to jack the car off the ground to see it and get at it for repAIR

Ad

Anonymous

  • 73 Answers
  • Posted on Jul 30, 2009

SOURCE: acura

Pablo Gonzalez

  • 733 Answers
  • Posted on Feb 16, 2010

SOURCE: location of the knock sensor on a 2001 Acura TL

The knock sensor is part #8 on the diagram. seems to be inside the engie. call your acura dealer to verify. if it is, it's a lot of work.
http://estore.honda.com/EPC/asp/rjane007.asp#

Anonymous

  • 62 Answers
  • Posted on Feb 19, 2010

SOURCE: location of knock sensor 3.2 1996 acura tl

remove the intake manifold ,remove radiator ,remove radiator intake and outake housing, remove fan ,remove all belts: power steering, alternator and if you have a/c, remove harmonic balancer ,remove timing belt covers, remove timing belt remove intake housinng once you have remove all the above, your freaken engine will look naked, you can see the location of the knock sensor is locate in the engine valley

ZJLimited

ZJ Limited

  • 17989 Answers
  • Posted on Feb 01, 2011

SOURCE: on 1996 Acura tl 2.5 where is located the speed

For 1996 Acura TL 2.5L PFI 5cyl the Vehicle Speed Sensor - Location is located mounted on transmission.


zjlimited_595.jpg


Fig.: Exploded view of the vehicle speed sensor (click for zoom).



Hope this helps (remember to rate this answer).

Testimonial: "thak you very much for your help "

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

What is the location of bank 1 sensor 2 oxygen sensor on 1996 acura 3.2 tl v6 upstream or downstream?

sensor 2 is always downstream of the Cat.

Which 02 sensor is bank 1 sensor 2? Bank 1 Sensor 1 is the first sensor closest to the engine. On Bank 1 means it is at the engine side with cylinders 1, 3, 5, 7, etc. Bank 1 Sensor 2 is the second sensor on the engine's exhaust pipe, usually behind the catalytic converter.
Jan 26, 2022

https://www.google.com/search?q=1996+acura+3.2+tl%2C+bank+1+sensor+2+location

..
0helpful
1answer

How long should it take and what would it cost to replace defective knock sensor on 2003 Acura 3.2 tl

if this picture is accurate, about 30 minutes. https://www.acurapartswarehouse.com/parts-list/2003-acura-tl-4dr-tl-navi-ka5at/cylinder-block-oil-pan.html?PNC=8
2helpful
2answers
3helpful
1answer

On 1996 Acura tl 2.5 where is located the speed sensor?

For 1996 Acura TL 2.5L PFI 5cyl the Vehicle Speed Sensor - Location is located mounted on transmission.


zjlimited_595.jpg


Fig.: Exploded view of the vehicle speed sensor (click for zoom).



Hope this helps (remember to rate this answer).

1helpful
1answer

1996 acura tl 2.5 automatic where is the speed sensor? I remove one on top of the transmission but have two wires or cables going inside the trans

5 or 6 cylinder model TL?
====
The vehicle speed sensor (VSS) is locate on the transmission.
To help you identify the VSS,I include few pictures.
mustgo_40.jpg
mustgo_41.jpg
mustgo_43.jpg
Please be careful with the pin. Lube it with white lithium grease before put this pin back into the sensor.
0helpful
2answers

Location of the knock sensor on a 2001 Acura TL

The knock sensor is part #8 on the diagram. seems to be inside the engie. call your acura dealer to verify. if it is, it's a lot of work.
http://estore.honda.com/EPC/asp/rjane007.asp#
1helpful
1answer

Location of knock sensor 3.2 1996 acura tl

remove the intake manifold ,remove radiator ,remove radiator intake and outake housing, remove fan ,remove all belts: power steering, alternator and if you have a/c, remove harmonic balancer ,remove timing belt covers, remove timing belt remove intake housinng once you have remove all the above, your freaken engine will look naked, you can see the location of the knock sensor is locate in the engine valley
1helpful
1answer

Acura TL 2004, code: P0325 knock sensor1 (bank1) circuit malfunction, please help. thanks...

9 times out of 10 it is a faulty sensor. if you have the 4 cylinder engine, v-tech? it will be located on the back of the block next to the oil filter. if you have the V6 it will be under the intake manifold.you can test the knock sensor with a dvm. set your mter on continuity, hook your leeds to the single pin conector and the side of the sensor, you should have a resistance reading.now lightly tap on the side of the sensor with a small screw driver. if the resistance changes the sensor is good
Not finding what you are looking for?

209 views

Ask a Question

Usually answered in minutes!

Top Acura Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...