SOURCE: need 4 digit radio code for 2001 mitsubishi eclipse
try to call the mitsubishi dealer coz every radio has different code thats the only way you can get those code.
SOURCE: 2001 mitsubsi eclipse enter car radio wrong code 3 times
Put the key in the ignition and set it to "accessory" setting and leave it there for about 45 minutes.
After that remove the key and put it back in and you should be able to enter the code again.
SOURCE: 2001 mitsubishi eclipse 3.0l ticking noise
No. The valves are hydraulic. Pour about a coke tin amount of diesl in with the engine oil. Run the enginr to normal teperature. Drain the oil and refill with new oil. It sounds like a lazy or blocked follower. Once you do this it should disappear.
SOURCE: 2001 mitsubsi eclipse enter car radio wrong code 3 times
call 1888mitsu2001, choose option #4, then hit * (star). give the
operator the last 8 numbers in your vin and they will provide the radio
code for FREE!
DO NOT PAY FOR THE CODE ONLINE OR GO TO THE DEALER (they will also charge you).
- you will also need to provide the serial and part number of your radio
(takes about 5 minutes to take apart an eclipse dash...1 screw in the
bottom of the HVAC panel) if you call the 1888mitsu2001 it will provide
basic instructions on how to accomplish this.
- if your radio says "off" (meaning you entered the wrong code too many
times) you need to put your key in the ignition and turn it to ACC mode
for approx. 45min - 1hr and then your radio will say "code" at which
point you can enter the code to unlock the radio.
SOURCE: 2001 mitsubishi eclipse. Automatic transmission
Transmission may be low on transmission fluid or the transmission fluid pump failed. If it's electrical, you can still get it in to gear, but would not shift gears. Good luck and keep me posted, check transmission fluid level and have the transmission line pressure tested. Before that check all your fuses.
347 views
Usually answered in minutes!
×