At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Question moved from Spanish car maker Seat (See-At).
Jeff is our professional auto-electrician tech here, but I will just say this vehicle has a LOT of fuses! As I side note, I hope the airbag doesn't explode when you are playing with the connections!
depending on which one it is, pass or driver seat, its within the female reciever of seatbelt. easier to remove seat and inspect wiring to pretentioner. check for open by unplugging it and check across connector w olhm meter. if no reading, its open and needs replacd. unhook your battery before attempting this.
I have a similar issue in my 2009 Sierra 1/2 ton. I have no heat. The truck does not have A/C. I pulled off the kick plate to see if I could see the blend door actuator but it is not there. It must be the one I saw on you tube..below the airbag. Not too confident about pulling the airbag. It might be the heater core as I get good airflow in all locations. Suggestions appreciated. :-)
there is not a know sensor ........ may be a knock sensor and is under the intake maniful be carefull if is rusted the tread can brake so easy big problem to get it out good luck
×