1998 Ford Taurus hazard lights and turn signals stopped working. fuses are good, what's next?

The hazzard lights use a different flasher than the turn signals. Are all bulbs stock type and good?

do your signals work ? listen when signal is on the (clicking noise) when you find that flasher relay is next to it.

its not a fuse. grab the hazard button and try moving it, back, forward ect, it the hazards start to work, then replace the switch.

Have you checked the flasher?

Check the fuse/relay panel for a blown fuse/relay. Also look at the turn signal flasher and the four way flasher located in fuse/relay panel for problem. If the fuses are good replace the flashers to correct the problem. Hope this will help you.

Take the turn signal lever and jiggle it, a lot. If they start working, the switch is bad. You can also turn on the hazards and take hold of the button and push it left , right , forward and back and see if they start working. If so, replace the turn signal/ hazard switch.

no the power mirrors are not.
you have a flasher for the signals and the hazards,in fact you have two they can be in several places under the dash on the fuse box or they can be on the right side behind the glove box or on top of the steering column to the right side under the dash

hazard switch try in out alot fast may fix or spay with co cleaner in side switch

set ur hazards if they blink its not ur wirring its either ur turn relay or turn switch

i can tell u this the multifuncion switch is in the steering colum signals,highbeam flash to pass and wipers chuck