SOURCE: rear hatch window installation
To install, get about 1/4" cord(rope will work), put the seal on the
window, put the cord in the SEAL, where it seals to the CAB, have
someone hold the window up to the back of the cab for you. You want the
cord to meet at the top in the center. Try and get the window on the
frame as much at the top as possible, then start pulling the cord. Be
careful, a medium sized flat screwdriver will help too. The object is
to get the cord to pull the seal around the frame of the window for you
without using the screwdriver. You can use the screwdriver to help, but
careful, it'll rip the seal very easily
When I worked in a bodyshop, we would grease up the cord with white
grease, but I've done it without it. You just have to be real careful.
SOURCE: 96 Bravada, tailgate and rear glass won't open
its a linkage problem . you need to remove the door panel to repair
SOURCE: 2000 olds bravada. headlights and taillamps stay
PROBLEM COULD BE THE AUTOMATIC LAMP CONTROL RELAY OR FAULT IN THE BODY CONTROL MODULE.
SOURCE: "Oldsmobile Bravada: I own a 1992 Olds Bravada.
Did you try bending the metal arm going to the wiper blade so there is enough pressure to make the blade contact the window better. I just did one two days ago and if im reading what what you are saying right its is the same problem and it fixed it
SOURCE: How to remove the radiator
You have to use pri bar to hold against when screwing off. You put pri-bar against section you are turning as to not have fan to turn while unscrewing
152 views
Usually answered in minutes!
×