SOURCE: i need to know how to replace rod bearings in a 98 eclipse
Well, the answer is to unbolt the rod cap, install new bearings and retorque.
But I worry about this repair. The reason that the bearings failed must be resolved, before any repair is performed. This repair requires that the surfaces be true and that the clearance is correct at at least three places across the rod bearing surface.
You can measure with micrometers, but if you remove all oil, you can measure with a product called platicgauge.
SOURCE: torque specs on 93 corvette rod bolts
from the service manual.
Connecting rod nuts, tighten evenly to 20 ft pounds then turn another 55 degrees of rotation, seems odd but i have the factory manual
SOURCE: where does the power steering
Hope this helps!!! Please don't forget to rate....thanks!
The power steering pump drive belt-1995-98 2.0L non-turbo engines
SOURCE: I need torque specifications for
YOU NEED TO MAKE 3 PASS FIRST PAST TORQUE CYLINDER BOLTS 44 FT LBS. SECOND PASS TORQUE CYLINDER BOLTS 59 FT LBS. IF YOU HAVE 17MM HEAD BOLTS TORQUE TO 70 FT LBS.THE THIRD PASS TIGHTEN ALL CYLINDER BOLTS ADDITIONAL 90 DEGREES. ROD BEARING BOLT TORQUE TO 35 FT LBS.
108 views
Usually answered in minutes!
×