What i need for a tune up for a 2011 dodge caliber heat

Question edited for clarity.
Question moved to model category.

Recalibrate the display.

https://www.google.com/search?q=2011+dodge+caliber+calibrate+radio+touch+screen

..

Question edited to add maker.
Question moved to model category.

There are ideas in the link

https://www.google.com/search?q=2011+Dodge+Caliber.+No+audio+for+car+radio

..

https://www.modifiedlife.com/2011-dodge-caliber-car-radio-wiring-guide/

sounds like you need to see a transmission specialist

unscrew it

When it no longer provides a spark to spark plug

For a standard tune-up, the parts needed include an air filter, oil filter, fuel filter, spark plugs, and spark plug wires. You should also have oil, transmission fluid, coolant, windshield washer fluid, and brake fluid available. A tune-up consists of topping off or replacing fluids, changing spark plugs and spark plug wires, changing the fuel, oil, and air filters, and checking the pressures of the tires. More detailed tune-ups run a diagnostic test on the vehicle to check for any codes that indicate additional issues.

Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.

To confirm the problem, the basic troubleshooting is required.

Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.
Thanks.

New spark plugs or coils, wires, cap, oil change, fuel filter, change transmission fluid, coolant fluid. air filter

easy there may be a cover over he engine which just lifts off, then you need a selection of torx bits to remove the screws that holt the coils 1 for each coil disconnect the electrical connector on the coil and remove the coil pulling straight up then ysing a 5/8 spark plug socket remove th eplugs and install the new plugs put back the coils and go