How to replace my blend door actuator on my chevy tahoe 2004

SOURCE: Where is the (front) blend door actuator located

Of course it is it's never to get to anything on cars it's under the dash on the right side but you are looking at blend door but why? do you understnd the operation of them? if not you do not know what your looking for, as there are three on the car and figueing out witch one you need to look at.

SOURCE: ned to know where the blend door actuator for the

i think it is on the air distribution box and alot of times you have to take it out to take the actuator off which requires removal of the dash

SOURCE: power door locks on a 2004 chevy tahoe don't work

The door locks on my 1999 tahoe stopped working and I checked the fuse, which was fine. The problem turned out to be that the fuse for my cigarette lighter was bad and for some reason it also must be working in order for the door locks to work. Put in a new cigarette lighter fuse and the door locks worked again!

SOURCE: remove ash tray from chevy

usually a tab to press to release ash tray, or tabs to press on the sides of hte ash tray.

SOURCE: Drivers side blend door actuator not working

Hello: I have bad news for you, if you run the actuator without it connected to the door the actuator is ruined, it will have to be replaced. After replacement the system has to have the doors (actuators re-calibrated.) re-calibrated. This is done with a Tech 2, A GM special tool.