Question about Chevrolet Avalanche
Remote Control Door Lock Receiver (RCDLR)
The remote control door lock receiver (RCDLR) is a multifunction module that operates both the keyless entry system as well as the tire pressure monitoring (TPM) system. When an RF message is received from a keyless entry transmitter, the RCDLR interprets this signal and will request via serial data that the body control module (BCM) perform the specific function, i.e. door lock, door unlock, or vehicle locate. The RCDLR also sends messages out to the 2 Way Advanced Remote Start transmitter.
Remote Control Door Lock Receiver (RCDLR) (AP3 or AP8, without E52)
Top rear of the passenger compartment above the rear window
Remote Control Door Lock Receiver (RCDLR) (AP3 or AP8, with E52)
Left rear of the vehicle behind the D-pillar trim panel
Body Control Module (BCM)
On the lower left side of the I/P to the left of the steering column
Good luck !
Posted on Jul 06, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jun 06, 2017 | Chevrolet Cars & Trucks
Apr 16, 2017 | Cars & Trucks
Dec 06, 2015 | Cars & Trucks
Dec 01, 2015 | 2007 Chevrolet Impala
Sep 16, 2014 | 2010 Chevrolet Chevrolet Malibu LT
Jun 25, 2013 | 2010 Lincoln Navigator
1. Locate the red two wire programming connector located near the central
locking control module. Behind LH lower instrument panel.
2. Inside the red programming connector you will see two pins.
Jump the two pins with a section of wire. A paper clip bent in a "U" shape will also work.
3. System should now lock and unlock doors to indicate vehicle has entered
4. Press any button on keyless remote once. System should now lock and unlock
doors indicating the keyless remote has been programmed.
5. Repeat step 4 to program the other remote.
6. Remove jumper wire from programming connector to exit programming mode.
7. Test Remote(s).
Sep 02, 2011 | 1995 Chevrolet Blazer
Aug 12, 2011 | 2002 Chevrolet Avalanche
Sep 15, 2017 | 2008 Chevrolet Avalanche
May 27, 2009 | 2003 Chevrolet Avalanche
1,780 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: