Question about 2000 Jeep Grand Cherokee
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Actually the newer cherokees are a little more complicated, it's not a reminder for an oil change. It is for an emssions service that should be performed according to the dealer. Here is the rest procedure
Turn ignition to on position, but do not start.
Depress brake pedal fully twice.
depress excellerator very slowly twice
Turn ignition off & that will reset the perform service indicator.
I am mechanic & we are getting frustrated because the dealers do not want to release this info to anyone, they want your money! Can you believe if you did not get them to perform the service they charge you a 1 hour shop rate??
Posted on Jul 13, 2010
When this feature is selected a service interval between 2,000 miles (3,200 km) and 6,000 miles (10 000 km) in 500 mile (800 km) increments may be selected. Pressing the STEP button when in this display will select distances between 2,000 miles (3,200 km) and 6,000 miles (10,000 km) in 500 mile (800 km) increments.
Reset Service Distance (Displays Only if Service Interval was Changed)
When this feature is selected the current accumulated service distance can be reset to the newly selected service interval. Pressing the STEP button when in this display will select "Yes" or "No."
Posted on Nov 02, 2008
One long bolt at the top - requires a 7mm socket to remove the bolt. The light housing will pry out with a screw driver. There are three ball and socket type connectors that hold the housing in and I just pryed off the plastic housing carefully and "balls" pop out of the sockets. Finally, I was replacing the faded plastic housing and it came with a new wiring harness. It's impossible to reach the connector to use the new wiring harness that comes with the new plastic light housing. So just use the existing wiring harness with the new light assembly.
Posted on Feb 06, 2009
If you have the same pulley arrangement that most 4.0 engines have that pulley is an idler not a tensioner. Your power steering pump has a pivot bolt, and a slide under the pump. You adjust belt tension using the pump.
Posted on Apr 05, 2009
You have to manually reset it. Press the step button until miles to service comes up, then press and hold reset.
Posted on May 07, 2009
Tips for a great answer:
Aug 24, 2014 | 2001 Jeep Grand Cherokee
Jan 14, 2012 | 1994 Jeep Grand Cherokee
Oct 01, 2009 | 2006 Jeep Grand Cherokee
May 07, 2009 | 2001 Jeep Grand Cherokee
Apr 22, 2009 | 2000 Jeep Grand Cherokee
Apr 15, 2009 | 2000 Jeep Grand Cherokee
Jan 11, 2009 | 2000 Jeep Grand Cherokee
1,810 people viewed this question
Usually answered in minutes!