08 ford mustang 4.0 liter keeps kicking eng codes PO446,PO443,PO403,PO161,PO155,PO141,PO135,

Fix your car right away, by clicking the link
https://www.reliable-store.com/search?type=product&q=2002+ford

Most lambda sensors have fuses check fuses if not look at wiring

Make sure they are installed right. Those codes are because of heater circuit and wrong reading from the sensors.

take it to your local ford dealer there is a possible recall

http://www.motortrend.com/cars/2000/ford/explorer/recalls/

code p0443 refers to EVAP canister purge valve--circuit malfunction===causes --wiring---EVAP canister purge valve--ECM

code p0451 refers to EVAP pressure sensor --range/performance problem===causes --EVAP pressure sensor

code p0135 refers to heated oxygen sensor(HO2S) 1 bank 1 heater control --circuit malfunction===causes --fuse--wiring--HO2S ---ecm

basically the HO2S sensor is not stable and altering the air/fuel mixture settings for the ECM and this is not being helped by a faulty EVAP purge valve and pressure sensor.

code po122 is for your throttle position sensor. po155 is for your down stream o2 senor .po135 is for your bank 1 sensor 1 o2 sensor. po102 is for your maf sensor

PO505 is idle control system malfunction. PO446 is evaporative emissions ( evap) vent system performance . PO443 is evaporative emission control sytem purge control circuit malfunction. PO135 is O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 1) PO141 is 02 Sensor Heater Circuit Malfunction (bank 1 sensor 2) Now what does all this mean. It means your O2 sensors are being effected by a problem upstream. Could be a many things. If the engine runs perfect then it may be one bad O2 Sensor but it may not. My advice is to have this diagnosed by a trusted mechanic who has the tools, skill, and knowledge to find the problem and not just throw parts at the problem. You can spend lots of money on this unless you know exactly what is causing all these codes.

P0161(O2 Sensor Heater Circuit (Bank 2 Sensor 2). ...

I would say u have a shorted heater circuit, have u checked the fuses under the hood and in the cab? if it is blown disconnect the sensors and see if it happens again.

P0135--OXY SENSOR HEATER CIRCUIT(bank 1 sensor 1)
P0141--OXY SENSOR HEATER CIRCUIT(bank 1 sensor 2)
P0155--HEATED OXY SENSOR HEATER CIRCUIT(bank 2 sensor 1)
P0161--HEATED OXY SENSOR HEATER CIRCUIT(bank 2 sensor 2)
P01132--LACK OF HO2S11 SWITCH--SENSOR INDICATES RICH
P01152--LACK OF HO2S21 SWITCH--SENSOR INDICATES RICH

Here are the code definitions.hope it helps.