Push on button and console indicator light dosn't turn on and cruise control dosn't work.
Try pulling up the brake pedal with your foot,Sometimes your brake doesnt come back all the way,and the brake switch keeps the cruise from working.Also,check the fuse.If those answers dont help,It could be the swith itself is bad.Those can be bought at a parts store.
This problem can also be caused by the brake caliper bolt/guide pin sticking, either because brake pad dust is making the pin bind, or because the pin itself is bent. There are two pins on each brake caliper assembly.
To clean the pins, remove them and use steel wool to burnish the surface. Replacement is inexpensive - a pair costs about $10 from an auto parts store.
This problem can also be caused by one or more brake caliper pins sticking because brake dust makes them bind, or because one or more is bent. The pads don't go back to the open position, therefore it seems that the brakes are always on.
If this is the case, remove the pins and clean with steel wool or a wire brush and replace, or buy a new pair of pins for each caliper. The cost for a pair is around $10.00.
Bear in mind that if the pads are not retracting, excessive pad wear may be evident, or even damage to rotors (metal on metal)..
×
Look at the steering wheel cruise control switch there known to go bad thanx Chris
3,363 views
Usually answered in minutes!
Cruise light flashes but does not engage
Bad switch in the steering wheel
×