SOURCE: Broken power window mechanism in
Remove the plastic screw covers at the forward edge of the door. Remove the 2 gold coloured screws.
Using a flat blade screwdriver, insert the blade above & below the locking thing at the door handle, pry up and down, top & bottom respectively. Slide & pull the handle out, remove the rod going to the handle.
Remove the 2 big screws for the door panel. 1 is under a small trim cover, the other is under the armrest
Remove the lower light & unplug it (if you have one) which may be under the arm rest (it pops out)
Press the centers of the 2 round push clips that are on the rear edge of the door panel and pull the clips out
Remove any screws at the bottom of the door panel (if you have them)
Starting at the bottom of the panel pull straight out with steady, even pressure as to not snap the plastic clips. After the bottom & side clips are disconnected from the door, lift the top of the panel straight up.
Remove the plastic sheet that covers the inner shell of the door.
Uning a 10 millimeter socket, remove the bolts that holds the window onto the regulator
Remove the window, up & out thru the top of the door
Unbolt & replace the regulator.
SOURCE: i need the wiring diagram for a 1992 toyota camry
Try this link, it should be what you need.
http://www.the12volt.com/installbay/stereodetail/2037.html
SOURCE: i need a timing belt diagram for a 2000 toyota
My apologies for the delayed response. I am going back and answering questions that were never answered.
Click on the following Link. It has all the Diagrams for the Timing Belt you will need.
Before Clicking, let me know if this helped.
Again my sincerest apologies...
www.2carpros.com/car_repair_information/year/2000/make/toyota/model/camry/2000_toyota_camry_timing_belt_diagram_marks.htm
SOURCE: Wiring diagram to install OEM 2010 Toyota Camry fog lghts
here is a link that can help you.
http://www.donmar.com/Tech/FogLight-TCA-303.pdf
1,647 views
Usually answered in minutes!
×