SOURCE: engine identification number 3789404 and
Hello, according to my manual the 3789404 is the casting number for the 292 cubic inch inline-6 cylinder block produced from 1963-1976
I do not show a 3764478 number...3764476 is a 235 CID inline-6 from years 1958-1962
These are Chevrolet castings.
I hope this helps.
SOURCE: I bought a Chevy 350
Go to www.nastyz28.com and i think you will find what your looking for.These blocks have a high nickel content which makes very strong.This will be a good motor to build horse power with.
SOURCE: I purchased a 350 Chevy
3970010 = casting number of an 350 small block.
V0408TDR = V - motor made in Flint, 0408 - made in april 8th, TDR - in 1980 for an californian sold car with 155 hp, auto trans and C-10 body.
C8F438333 = partial VIN number, it should match the VIN on the body of the original car: C - engine code, Chevy small block; 8 - engine model year 1978; F - car manufacturing plant Flint, 438333 - manufacturing serial number of the car.
SOURCE: Where is the identification number found on the Cadillac Allante's engine?
#1 is the Engine ID
#2 is the VIN Derivative
Search the block for the engine block casting number. The numbers are raised, not stamped into the block and consist of seven numeric digits. The digits can be located on either side of the block. The seven-digit number may be followed with a dash and further numbers. These are change codes and are not normally necessary to identify the engine.
EX.:
Locate the casting date is located on the block. It is in standard date coding, 2.25.93, for example and may be located on either side of the block, but is commonly located on the driver's side of the block, above the freeze plugs. The example 2.25.93 decodes as February 25, 1993. The casting date may be near the casting clock, which designates the hour the block was cast. Magnum engines were manufactured from 1993 to 2002, so verifying the date code helps identify the engine.
1,267 views
Usually answered in minutes!
×