I'm looking for a wiring diagram for the rear turn/brake lights for my 1996 F250 Crew cab. I have no lights at all. I have replaced all bulbs, but still nothing. I have checked the light switch for power, and traced it back to the rear wiring harnes. Thank you

the tail lights are the same bulb but they use a different filament in the bulb.you may need to replace the bulbs.another possibility is there maybe a problem with the wiring for the tail lights between the socket and the area where the trailer wiring is connected to the truck wiring.try the bulbs first,you just have to try one first to see it it works or not then you will know what to do next.

Check your Ground wire. Use a test light that is grounded and see if you have fire on any of the turn signals or running lights.

Well To do so Type On the URL Download 1996 Ford F250 Crew Cab Manual & Utility... You May find what you looking for ...Good luck

The brake light switch on your truck, is wired so the brake lights and 3rd light are on seperate circuits. Check the wiring right at the connector on the switch. Pull on each wire individually and you will find one that is being held together by the plastic insulation only.

I have a f-250 super duty,2001, dash& running lights don,t work, found a 15 amp fuse blown in engine compartment. fuse,s keep blowing. please help.

replace your stop light switch its on the brake pedal

did you check light bulbs if so and ok
check fuses

Open the hood, look at the back of the headlight. There is a black sleeve that the head light wires run through, turn the sleeve and slide it back on the wires,unplug wires,& pull bulb out of headlight. reverse procedure to replace bulb.

Pls Check Wire Connectivity.

I beleive the diagram is on the inside of the plastic fuse cover, mine is.