Question about Honda Accord

Open Question

I have a 2002 honda accord that when i run the scan for obd2 it says mil is off is that suppost be

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
USfalcon

anwar alkhaldi

  • 197 Answers

SOURCE: Where is the OBD2 connector on 1997 Honda Accord

e2109c6.gif

Posted on Mar 31, 2009

Ad
mrhappyface

Joe Garcia

  • 206 Answers

SOURCE: where obd2 plug located

under the dashboard

Posted on May 30, 2009

steve_e_uk

steve morris

  • 1675 Answers

SOURCE: I have a 2002 Honda

hi there are 2 types for this vehicle, there is a 2 pin type and the normal ODB2 type 16 pin plug, these are normally found on the passenger side of the car under the dash near centre console..hope this helps

Posted on Sep 19, 2010

ZJLimited

ZJ Limited

  • 17970 Answers

SOURCE: Where is obd2 connecter on a 2002 honda accord

Find the Data Link Connector (DLC) located under the instrument panel in the driver's side.

Posted on Sep 06, 2011

danglin_dan

Dan Johnston

  • 118 Answers

SOURCE: 2002 Honda accord passenger power window won't go

run power t the motor to see if motor is bad if not pull apart switches and clean contacts or replace

Posted on May 05, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagnostic code


scan it,
use any OBD2 (USA are you?) scan tool.
scan it for stored, DTC errors, as the lamp is telling you.

Dec 18, 2013 | 2005 Honda Accord

1 Answer

Cylinder position sensor intermittent interruption


so the car is in the USA? and if true. it has OBD2
and as such has a OBD2 scan port and as you scan
it shows errors, did it, did you?//// shoe drops...
CMP sensors, (cam)
if car is USA the FSM covers this 100% honda books are superb , like Toyotas.
the book is here, see it? at bottom? its free, give it a whirl.
http://hondatech.info/downloads/Auto/Manuals/Accord/

i can tell you, if the CMP is droping out 1 in 10times
it's bad,or the connections to it, are bad.


Aug 30, 2013 | 2000 Honda Accord

1 Answer

Where is obd2 connecter on a 2002 honda accord 2.3L?


Find the Data Link Connector (DLC) located under the instrument panel in the driver's side.

Sep 06, 2011 | 2002 Honda Accord

1 Answer

Winter time!!! my 2005 honda accord sedan engine light came on!!! after a cold day and end of my shift i started it and boom the light is on and it still is im worried.I passe my e-test last summer,and i...


harrd to say wiithout being near the vehicle. the best thimg to do if you don't have access to an obd2 scanner. if its driveable go to nearest parts store and ask them to do an obd2 scan for you. it's free

Jan 17, 2011 | 2005 Honda Accord

1 Answer

2001 honda accord,check engine light on,found code p1146 and p1147,whath could be the problem?


Neither of these codes are Honda codes. They are VW, Hyundai, and Subaru codes. So these are meaningless. How did you come up with these codes? Take your Honda to Advance auto parts and have them scan the ECU with an OBD2 scan tool.

Jul 07, 2010 | 2001 Honda Accord

2 Answers

I have check engine light on my dashboard always.this amber light is permanently when the car is running [1997 honda accord]


It indicates a trouble code is being sent and a component on your Honda needs attention.

The easiest way to find out what's going on is take the car to your local auto parts store and ask them to run a scan of your OBD2 port.

They typically provide this service for free and will then tell you what codes come up and what they mean. Depending on the code, you may be able to fix the problem yourself or you may need to take it to a repair shop for repair.

Nov 15, 2009 | 1997 Honda Accord

1 Answer

EMMISION 1995 HONDA ACCORD


The OBD2 system is on '96 and newer cars. There should be an OBD1 connection under the hood on the drivers side, But good luck finding an OBD1 scan tool.

May 22, 2009 | 1995 Honda Accord

1 Answer

1991 honda accord exr


Since the 91 model is obd1 there is no scan tool that can be hook up to it,but on the right kickpanel there is a two pin connector you can jump with a simple tool like a paper clip with the key on and the engine not running and this will cause the the mil to blink your code you will get a two different blinks a long one and a short one you combine both to get the code.example two long ones followed by one short is a code 21.

Mar 18, 2009 | 1991 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...