Question about Cars & Trucks

1 Answer

Driver headlight wont work, replaced bulb. works for a bit then stops, if u touch it it turns on but then off again. do I need to replace the pigtail or ?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

  • Expert
  • 73 Answers

Maybe try some contact cleaner, Could be as simple as dirty contacts or grease on part of the plug.

https://www.walmart.com/ip/CRC-Electronic-Cleaner-11-Oz/16817418

Posted on Aug 18, 2017

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 2 Answers

SOURCE: Driver side headlight bulbs burned out on 2003 VW Golf

There is a light cover in front of the battery... take this off and then look for the metal clamps holding the light housing in.  (I say clamps, but they're more like glorified paper clips on either side of the fixture.)  Press in on each side, pushing the clamps towards each other and pull the fixture out.

Posted on Dec 04, 2008

Bill Hackett

  • 383 Answers

SOURCE: 2001 subaru outback headlight not working

chapmnfarm: your head lights use a "2" fuse system.
one for the left and one for the right.
The fuse box you are looking for is under the hood on the passenger's side. It is a black box roughly 8 inches long and 4-5 inches wide. When you remove the cover, you will see fuses and relays. What you are looking for is the section in the box which has a cluster of 7 fuses. 3 in one row and 4 in the other. On the outer parameter are two relays. The fuses you are interested in are located in the row of 4 fuses, with the two closest to the "L" shaped part of the box. Both of those should be 15 amp fuses.
The fuse below those should be a 20 amp which is the lighting switch and the one below it is a 15 amp which is for the interior lights and the clock.
Check your harness grounds in the engine compartment near the area you have the problem. There are ground wires which come out of the harness on both sides of the core support. The wires are black in color and have "EYES" crimped onto the ends of the wires. Both of them will probably be located about 4-6 inches below the upper tie bar on each side of the radiator. Odds are that the eyes will be large enough to pass a 6mm bolt through.
I hope what I have given you will resolve your problem. Lem me know,,good luck>>>>>>>>>>>>>>>

Posted on Apr 19, 2009

roy7777

Roy McShane

  • 109 Answers

SOURCE: after turning ignition, only parking lights work. low beam headlights were replaced recently. parking lights wont even turn off. headlights

I had an S-70 with the same problem what happens is the headlight switch tabs that hol it together broke and the switch was slightly separated and connection was not there for the headlights and also check the high beam see if headlights come on i dont think it is a relay or fuse??? proballally the headlight switch and easy to replace you even can use one from an 850 model

Posted on May 17, 2009

Anonymous

  • 1 Answer

SOURCE: how do you replace a nearside headlight bulb on a

There is an access point in the wheel arch. remove cover to reveal the back of the headlight cover. just done mine. its fiddly.

Posted on Jan 18, 2010

Anonymous

  • 1 Answer

SOURCE: Audi A4 2002 Low beams & Right front turn signal stopped working

but on 2002 A4, F20 and F21 are empty! Does anyone has an idea where the headlight fuses located?

Posted on Jun 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace headlight on 03 grand am gt


First you need a 10mm socket and Ratchet take the two bolts off of the top of the headlight and after those come out you can pull the headlight away from the car a little bit and unplug the plug being sure not to break the little tab that holds it on tightly then turn the ring that surround the bulb that should pull right out then the bulb will pull out itself when you're installing the bulb do not touch the glass of that bulb then reverse the order of taking the headlight out .


Feb 06, 2018 | Cars & Trucks

1 Answer

Headlight wiring diagrams


You can buy the replacement pigtail connector at the auto parts store the connector plugs on the back of the bulb inside the tube on the back side of the headlight box you remove the rubber dust cover and pull the old connector off the bulb plug in the connector on the pigtail and splice the wires to the old headlight wires all of this is done outside the headlight box there is no need to remove the headlight box.

Sep 05, 2014 | 2004 Chrysler Crossfire

1 Answer

2004 ram 1500 left headlight and turn signal not working have voltage at both pigtails


Check for ground at the pigtail. If you have power and ground, replace the bulbs.

Dec 24, 2013 | 2004 Dodge Ram 2500

1 Answer

Headlight fault


You may have blown a fuse, check fuses first then before you try to replace the bulb again check for broken wires or the correct bulb

Oct 25, 2017 | 2008 Kia Pro-ceed 1.6

2 Answers

Passenger headlight has a shortage in the wire. How do I know? The light bulb is not blown per auto mechanic, AutoZone, and by looking at the bulb myself; when I move the wire to the headlight the light...


You can fix it yourself you just need to find out where the shortage is. If its up close to the bulb then its not a big deal to change. Just go to an auto parts store and get a new headlight pigtail for it then splice it in. If its further up the harness it can be a little bit more difficult.

Sep 19, 2012 | 2006 Ford Five Hundred

1 Answer

I replaced my left headlight after it burnt out, and two weeks later it went out again. As I was trying to change it, it turned back on. By shaking it it would turn on. It was annoying but doable....


When you shake the bulb , the filiments inside the bulb can touch again and come on, very temproary. When you replace the bulbs do not touch the glass part. They do get very hot and will break. If you do touch them wipe them with window cleaner or some thing to the like. oil from your fingers will shorten their life a lot.

Aug 24, 2011 | 2004 Mazda 3

1 Answer

I installed HID headlights and fog lights about 2 months ago and the passanger side went out. i took the drivers side bulb and put it into the passanger side to see if the bulb or the ballast was bad and...


The headlights run through a relay (#46) through the BCM. If the relay were bad (very common and has a recall) both lights would not work. Sooo, I'm thinking check the wiring and pigtail that goes to the bulb. People that use Silverstar halogeon bulbs will burn that wire and or the connector. Make sure these are sound, check for power at the connector too.

Apr 17, 2017 | 2007 Chevrolet TrailBlazer SS

2 Answers

Headlight change


Whoa!!!! You don't need to remove the bumper. 90 and up Accords have a replaceable bulb. The manual says to disconnect the neg. battery cable before starting. You need to access the bulb from the back, remove the connector from the back of the assembly, then turn the retaining ring counterclockwise, remove bulb from housing.
When installing the new bulb DO NOT touch it, oils from your skin will cause the bulb to overheat where it has been touched, and shorten the life of the bulb. Wear gloves to handle it.

Apr 15, 2009 | 1991 Honda Accord

1 Answer

2003 golf diesel headlights butn out regularly


1 : either the bulbs are being touched by bare skin durring install <oils in skin will ruin the bulbs life> or you may have a bad connection .when replacing next make sure connector at back of bulb isnt melted or even "hot" looking if so replace pigtail. 2 : not a real easy way to replace but main thing is to not touch new bulb with skin.

Mar 22, 2009 | 2003 Volkswagen Golf

2 Answers

2005 GMC Envoy passanger headlight


I have had the same problem on both Headlights at different times on my 2002 Envoy. I had to replace bulb sockets. Sockets with pigtail can be purchased at most auto parts stores. Make sure to put conductive lube on terminals when reinstalling.

Nov 22, 2008 | 2005 GMC Envoy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...